CAUTION: After you select the Run Schedule function, any user intervention will cancel the activation (i.e., pressing remote or control button, powering off) and the schedule will not take effect until you select this function again to
Run Schedule from Slideshow
1.Start a slideshow and press ENTER to select the Run Schedule button when it appears in the lower left corner of the screen (approx 10 sec).
2.To run the schedule when the Run Schedule button is no longer displayed, restart your slideshow and then press ENTER to select the Run Schedule button when it appears.
3.The DPF will go into
Run Schedule from CALENDAR/CLOCK Screen
1.On the CALENDAR/CLOCK screen, press MENU.
2.Select Run Schedule.
3.The DPF will go into
A small timer clock will appear indicating the schedule is active, and then the DPF will operate according to the set schedule.
Set Date and Time
1.On the CALENDAR/CLOCK screen, press MENU.
2.Select Set Date/Time, and then select the options and use 
to change the field values.
3.Select Done.
27