Vivitar ViviCam 3730 manual Problem Cause Action

		Reference
Problem	Cause	Action
	- The mode dial is set to	- Turn your mode dial to Auto
Image is not recorded when		mode or Manual mode.
the shutter release button is	Playback mode.	- Wait until the flash charging
pressed.	- Flash is in charge.	finishes
	- Memory is full.	- Delete images you no longer
		need.
		- Hold the camera steady when
		shooting.
		- Be sure that there is at least
	- The camera was moving	80cm between the camera
Images are blurry or unfocused.	when you took images.	lens and the subject.
	- The subject was out of the	- Use the macro mode to shoot
	range over which the camera	close-ups images at a
	can focus.	distance of 20cm.
		- When shooting distance
		subjects, use the camera to
		Normal/Infinity focus mode.
	Camera power down before	If the low-battery indicator
Recorded images are not		appears on the camera LCD
saved in memory	the save operation is	screen, replace batteries with a
	complete.
		full set of new ones.
	A memory card with non-DCF	This camera can not display
Images are nor displayed.	images recorded with another
	camera is loaded in the	non-DCF images.
	camera.
The flash doesn't fire.	The flash mode is set to Off.	Set the flash to any other mode
		except Off.
	- There is a problem with the	- Please use the attached video
		cable to connect the camera
Image not showing on TV.	camera-TV connection.	to the TV correctly.
	- Incorrect video system	- Set the video system to the
	setting.	appropriatedsetting, NTSC or
		PAL for your TV
Cannot transfer images after	- USB driver is not installed.	- Install the USB driver before
		you connect the camera to a
connecting to a computer with
	- Camera is turned off.	PC.
USB cable.
		- Turn on the camera.

55