Viewing and Downloading Your Pictures Using a PC
Setting the Camera Sounds
By default, the camera is set to beep whenever you take a picture, connect the camera to a computer, or encounter an error condition.
To turn the beep sound off:
1Set the Mode switch to PREF.
2Turn the camera on.
3Press the 6 button until the Sounds menu tab is on top.
4Press the Select button to open the menu.
5Press the 6 button to highlight the Off menu option.
6Press the Select button to activate the setting and exit the Sounds menu.
èIf you wish to turn the camera beep back on at a later time, follow the same procedure and select the On menu option.
Setting Quick Review
By default, the camera displays the picture for a short period of time after you have taken it. This feature allows you to instantly review and delete the picture, but it also increases the drain on your batteries.
To turn off Quick Review:
1Set the Mode switch to PREF.
2Turn the camera on.
3Press the 6 button until the Quick Review menu tab is on top.
4Press the Select button to open the menu.
5Press the 6 button to highlight the Off menu option.
6Press the Select button to activate the setting and exit the Quick Review menu.
èIf you wish to turn Quick Review back on at a later time, follow the same procedure and select the On menu option.
TIP | If your batteries have a low charge, or if you want to maximize the number of pictures you |
| can take using one set of batteries, turn Quick Review off. |
|
|
23