Set Schedule
You can schedule the DPF to automatically go into a
For example, if you have your DPF on your desk at work, you may want to display the calendar/clock or play a slideshow from 8:30am to 5:30pm every weekday, and then set the DPF to remain in stand- by mode throughout the weekend. The following Monday morning, the DPF would resume operation at 8:30am.
1.On the CALENDAR/CLOCK screen, press MENU.
2.Select Set Schedule.
3.Use to move between the fields and to change the field values in Weekdays On/Off.
4.To set the Weekends On/Off, select the Enable Weekends Schedule button, and then use to access the settings.
5.Use to move between the fields and to change the field values in Weekends On/Off.
6.When correct times are set, select Done to return to the previous screen.
Disable Schedule
After the schedule has been set (per above instructions), you can disable the schedule whenever desired.
1.On the CALENDAR/CLOCK screen, press MENU.
2.Select Set Schedule, and then select the Enable Weekdays
Schedule or Enable Weekends Schedule button. The time fields
will display OFF.
3. Select Done.
Run the Schedule
After the schedule times have been set (per above instructions), you will use the Run Schedule function whenever you want the schedule to take effect.
There are two methods for running the schedule, either from a slideshow or from the CALENDAR/CLOCK screen.
28