FujiFilm XT174.5BRM-K14 operation manual For Your Safety USE

Page 3

FOR YOUR SAFETY USE

FOR YOUR SAFETY USE

This content explains important notices for all the users to use this product safely.Read the content carefully before using, and follow the instructions.

The following signs of WARNING and CAUTION show:

WARNING

Indicates the possibility of causing death or serious injury when misused.

CAUTION

Indicates the possibility of causing injury or substantial damage when misused.

WARNING

Do not moisten inside of the appliances. It may cause fire or electric shock. If the incident occurs, shut off the power supplied to the lens immediately.

Be sure to attach all the parts securely. Dropping any parts from a height may cause severe accidents.

Do not look at any sorts of strong illuminant such as the sun through the lens. Eyes could be harmed.

CAUTION

Take care when carrying the lens. Dropping the lens while carrying may cause injury.

Be sure to confirm that the camera to be used with the lens system (lens and accessories) is able to supply sufficient electric power to the lens system. If not, the lens system may not work normally and the camera will be damaged. The values of the power consumption of the lens and the accessories are described in “Specifications” section of their operation manuals.

Before supplying the power to the lens, make sure all the parts are connected correctly.

In order to install or release a cable, be sure to hold the joint part. Do not damage the cable by gripping. It may cause fire or electric shock.

If any sorts of incidents such as unusual smoke, noise, smell or obstacles are found, shut off the power supplied to the lens and detach the lens from the camera immediately. Please notify our sales agent or Fujinon service department as soon as possible.

Do not remodel the instrument: it may impair the functions of product or cause electric shock.

E1464/R2

Image 3
Contents Fujinon Lens Page For Your Safety USE For Your Safety USE Table of Contents General Description Installation Onto Camera Conditions of Object and Diaphragm Adjustment of Flange Focal Length Adjustment  Iris Sensitivity Adjustment Iris Adjustment Auto Iris Mode  Manual ModeIris Operation Focus Operation Zoom Operation Operation by Zoom Seesaw Control Lever Auto Cruising Zoom Operation Macro Operation  Procedure to CancelOther Functions  Return Switch Fig. BFunction & Mode Select Switches About Function & Mode Select SwitchesATTACHING/DETACHING Lens Hood  Attaching Detaching Maintenance  All Manual System Manual Focus, Manual Zoom Optional Accessories Zoom Servo System Specifications Outline drawing Page Siemens Star Page Page H0000000