Euphonix Professional Control Surface, MC Mix, MC Control setup guide Introduction, Logic Pro

Artist Series

professional control surfaces

Section 1: Introduction

The EuCon Application Setup Guide helps you setup EuControl to work with your specific application. EuControl must be installed before proceeding to your ap- plication’s section in this Guide. See the Installation section in the Quickstart or User Guides to install EuControl if you have not already done so.

Section 2: Logic Pro

Logic Pro 8 works with your Artist Series control surface with very little additional setup. Make sure the MC Mix and/or MC Control software is installed and that EuControl is running. Launch Logic Pro and click in a Logic window so it is the front-most application. Your surface now controls Logic Pro.

To make sure your Artist Series control surface works correctly with Logic Pro:

1.In Logic Pro, choose Logic Pro -> Preferences -> Control Surfaces -> Setup...

The Logic Control Surface Setup window appears.

EuCon APPLICATION SETUP GUIDE

5

Figure 2-1Logic Control Surface Setup window

2.In Control Surface Group 1 on the left side of the window, locate Channel Strip View Mode (fourth parameter from top).

3.Set this parameter to Arrange, not one of the other settings.

Use Software Update so your Mac stays updated the latest version of Logic Pro.

INTRODUCTION

Artist Series