Artist Series
professional control surfaces
3.1.1EuConized channel types
The EuConized channel types section contains checkboxes that determine which channel types appear on your control surface. If a certain channel is available in Nuendo and the corresponding checkbox is selected, that channel can be selected to appear on the surface. This channel is called EuConized.
All channels except Input channels are EuConized by default and can appear on the surface. This is useful to eliminate tracks from the surface, reduce memory usage, and reduce the time needed to build the EuCon mixer model when con- necting, adding, or removing tracks from the Nuendo project.
To enable/disable EuConized tracks, select the checkbox next to each type. Tracks without a checkmark do not appear on the surface. This setting applies only to the open project.
3.1.2Global Settings
The Global Settings section has two parameters: Tape machine style transport and Number of knobsets to cache.
Tape machine style transport
Two Nuendo transport control modes are available for the control surface. Toggle the modes from the Tape machine style transport option.
These transport modes affect the operation of the Stop, Fast Forward and Rewind buttons in the following manner:
Tape machine style transport checked
Stop: The control surface STOP button halts the transport and keeps the play head at the current position (even multiple presses), independent from Nu- endo’s preferences.
Fast Forward/Rewind: The FF/RW buttons always latch independent of the control surface latch time preference. Repeatedly pressing the same FF/RW button has no effect. The current action can be stopped by pressing the op- posite wind button, STOP, or PLAY. The FF/RW also stops if it reaches the be- ginning or end of the project.
EuCon APPLICATION SETUP GUIDE
9
NUENDO
Artist Series