•When the battery is completely discharged the LCD will flash the 15 minute icon and the ‘RES’ bar until the battery is returned to a charger.
•If the protection electronics detect a low battery voltage condition (any one cell reaches roughly 2.5Vdc or approximately 10V battery voltage), the LCD sidebars will flash until the battery is returned to a charger. If the battery is not returned to the charger, after a time the Fuel Gauge will be turned off and the LCD will go completely blank until the battery is returned to a charger.
LCD ICON’s |
| Indication | Action |
- Side Bar blinking |
| Learn | Full Discharge, |
- Any others on normally |
|
| then Charge |
|
|
|
|
- Side Bar blinking |
| Over Current | Remove |
- Any others lit and blinking |
|
| Excess Load |
- Side Bar lit, but NOT |
| Under | Return to |
blinking |
| Voltage | Charger |
- All others off |
|
|
|
- Display blank |
| Under | Return to |
|
| Voltage | Charger |
|
|
|
|
| 10 |
| |