Charging Dionic 90 Batteries

•DO NOT ATTEMPT TO CHARGE THIS BATTERY WITH ANY CHARGER OTHER THAN THE ANTON/BAUER InterActive 2000

OR T SERIES CHARGERS SPECIFIED IN THIS MANUAL.

•Allow the battery to reach a steady green (LifeSaver®) mode before using for the first time. Please read the individual charger Owner’s Manual to become acquainted with the many unique operating features of the chargers.

•The DIONIC 90 battery will be approximately 90% charged when the LED’s on the charger indicate FLASHING GREEN. The battery is 100% charged when the charger indicates STEADY GREEN. The Dionic 90 battery may be removed from the charger and discharged in either condition.

•The Dionic 90 battery can remain on the charger until just prior to being used. The LifeSaver (STEADY GREEN charger LED indication) maintenance routine keeps the battery charged and ready for use. If the battery will not be used for an extended period (more than 60 days) see “Operating Guidelines” on page 11.

For best results this battery should be used or returned to the InterActive 2000 or T Series charger within 48 hours of being removed from the charger.

Note: On some older chargers it may be necessary to install battery on charger, wait one (1) minute, then remove battery and re-install. This procedure may need to be repeated more than once to “wake up” a low voltage battery.