English
Loading your camcorder into the Flip Video™ Underwater Case
IMPORTANT
Before using the Flip Video™ Underwater Case, make sure that it is completely dry and clean. A single grain of sand or strand of hair can break the seal, resulting in leaks and possible damage to your camcorder. Use a clean, soft,
1 Open the Flip Video™ Underwater Case |
|
by lifting the safety latch and turning the | 1 |
locking knob counterclockwise. |
|
2
2Place camcorder in underwater case
bottom end first and align the front of the camcorder with the lens of the case. Camcorder will fit snugly.
3Close the underwater case.
Turn the locking knob clockwise | 3 |
until the yellow lines on the knob and back of case line up. Then, press the safety latch down flat into locked position.
1