Apollo 645-062 owner manual Owner and Warranty Registration Form, Fuse Values, Specifications

Page 9

OWNER AND WARRANTY REGISTRATION FORM

Included with this manual is an Owner and Warranty Registration Form. Please take a minute to fill out this card and return it to Rogue Audio. This card must be returned within 30 days of purchase to validate the warranty.

FUSE VALUES

Main fuse located on rear panel (1) – 5 Amp slow blow Tube Fuses (6) – ¼ Amp slow blow

Power supply fuses (1) – 1½ Amp slow blow (servicing req’d)

SPECIFICATIONS

output power	250 WPC
frequency response	10Hz - 100 kHz typical
	20Hz-20KHz at full output
THD	< 0.1%
input sensitivity	1.0 V RMS
dimensions	8.5” W x 24” D x 12” H
weight	100 pounds (45Kg)
shipping weight	225lbs/pair (101Kg)
power requirements	115/230V - 50/60Hz (15A
	service)

9

Image 9

Contents Apollo Table of Contents Introduction Unpacking the Apollo MonoblocksTools required none Connecting the Apollos Into Your System Connecting Apollo to the LoudspeakersConnecting Apollo to the preamplifier Connecting Apollo to the power outlet Triode/Ultralinear switchOperation of the Apollo Amplifiers Setting the Tube Bias Bias switches and Potentiometers Troubleshooting Owner and Warranty Registration Form SpecificationsFuse Values Limited Warranty