FOCUS Enhancements 2.3 Loop Mode Update, Normal Play, Loop Clip, Loop ALL, Play ALL

Page 4

FireStore

1.3 Loop Mode Update

It is now possible to identify different loop and play modes when FireStore is in STOP mode. To enter loop playback mode when FireStore is stopped, hold down the

(SHIFT/ALT)

button for two seconds (the button will flash once in this mode).

Then press the (STOP)

button and you will be able to cycle between the following

loop modes:

 

NORMAL PLAY

 

In this mode, FireStore will play the selected clip and pause at the end.

LOOP CLIP

In this mode, FireStore will loop the selected clip continually.

LOOP ALL

In this mode, FireStore will loop all the clips on the attached disk drive(s) continuously, in order.

PLAY ALL

In this mode, FireStore will play through all the clips on the attached disk drive(s) sequentially then pause at the end.

PAGE 5

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Addendum Table of contents Delete Clip Update User Interface UpdatesIntroduction Loop Mode Update Normal PlayLoop Clip Loop ALLRecord Time Remaining Update Timecode UpdateStandard Timecode TC Remaining Timecode REMNEW File Formats Slow Motion ModesMatrox QuickTime Avid DV OMFAV/C Control Fresh Disk Format NON-FATDisk Partition & Format Formatting. Formatting is notSystem Software Boot from Hardware Definable Splash ScreenTo access Diagnostics Mode, hold Diagnostics ModeAudio Correction Modes Updated Computer Operating System Support Factory ResetMicrosoft Windows XP Apple Macintosh OS FireStore FireStore Focus Enhancements, Inc Dell Ave. Campbell, CA USA
Top Page Image Contents