FireStore
In all cases, check your device's operating manual to understand how it controls external devices. In most cases, FireStore will act and appear as a VTR.
Note: FireStore’s AV/C control is intended to be used with a single file type. Therefore, it is important that you select only one type of file (e.g. Matrox, AVI Type 2 etc.) when attempting to use AV/C control.
5.0 FRESH DISK FORMAT
If you have a brand new disk drive that does not contain any existing partition(s), it is possible to create a FAT32 volume utilizing FireStore. Simply connect the FireWire drive to FireStore’s "To HDD" port and power up both FireStore and the disk drive. The display will read "NO DISK". Simply hold down the
(SHIFT/ALT) button for two seconds
(until it flashes) and then press the (HDD)
button. You will be asked...
Answer "Yes" by pressing the (PLAY)
button. WARNING: Formatting a drive will delete all information. Back up any
material you may wish to keep before
formatting. FORMATTING IS NOT
UNDOABLE! If you are unable to format the drive, see section 6.0 of this document.
6.0 NON-FAT 32
DISK PARTITION & FORMAT
If you have a disk drive that contains a non- FAT32 partition (such as NTFS, Mac OS Standard, Mac OS Extended, UNIX etc.), it is possible to partition this drive using FireStore. Simply connect the FireWire disk drive to FireStore and wait until you see the "NO FORMAT" or "NO PARTITION" display on the FireStore LCD. Simply hold down the
(SHIFT/ALT) | button for two seconds |
(until it flashes) and then press the (HDD)
button for two seconds. You will
be asked...
Answer "Yes" by pressing the (PLAY)
button. WARNING: Formatting a drive will delete all information. Back up any material
you may wish to keep before formatting.
FORMATTING IS NOT UNDOABLE! The
LCD will display “PARTITIONING...*” during the process. When finished, the default STOP display will appear.
PAGE 10