•Using Flash
When taking pictures in difficult lighting conditions, use the Flash to get the correct exposure. This function cannot be activated when recording movies or continuous shooting.
To activate the Flash
•Press the Flash/Right button on your camera repeatedly until your desired flash mode is displayed on the LCD display.
Your camera is equipped with five flash modes:
Flash button
SET
DISP
Auto. The flash fires automatically whenever extra lighting is needed.
Auto flash is enabled.
| 307 |
12M |
twice to reduce the
Always on. The flash always fires when you press the shutter button regardless of lighting conditions.
Slow sync. The flash fires with a delay and uses slow shutter speed. Off. The flash is turned off.
NOTE:
•Flash function is only available in shooting still images but not available in Burst and AEB modes.
•Do not charge the flash while pressing the zoom button. Charge the flash after releasing the zoom button if necessary.
Polaroid t1232 Digital Camera User Guide | 31 |
www.polaroid.com |
|