Polaroid t1232 manual Setting the Drive Mode, To set the Drive Mode

• Setting the Drive Mode

Your camera features a Self-timer and Burst which can be set in the Drive mode function in the Record Menu. The Self-timer allows you to take photos after a pre-defined delay. While Burst lets you take consecutive shots. This function is only available in recording still images. The Drive mode setting is automatically set to off when you turn off the camera.

Record Mode
Drive Mode	OFF
AEB	OFF
AF Area
AF Lamp
Sharpness

To set the Drive Mode

1.From the Record menu, select Drive Mode.

2.Use the or DISP keys to go through the selection.

3.Press the SET button to save and apply changes.

Record Mode
10	10 sec.
Drive Mode		OFF
2	2 sec.
AEB x2	Double	OFF
AF Area	Burst
AF LampOFF	Off

Sharpness

The table below shows the available Drive mode settings.

Icon Item Description

1010 Sec Self-timerSets a 10-second delay to capture image after pressing the shutter button.

22 Sec Self-timerSets a 2-second delay to capture image after pressing the shutter button.

		Performs delay and capture twice:
x2	Double Self-timer	•	Performs a 10-second delay, then captures the image.
		•	Performs another 2-second delay then captures the
			image again.

Performs continuous shooting when the shutter button is

Burstpressed and held down. Stops shooting when the shutter button is released.

Off Captures an image without time delay.

Polaroid t1232 Digital Camera User Guide	47
www.polaroid.com