Sonar/Autofocus
press the shutter button and hold the camera steady until the picture ejects.
These Sonar/Autofocus models let you preview your picture. Lightly press the shutter button part way down to see what your picture will look like. Then either press the button all the way down to take the picture, or release it and change your position or the camera angle and preview again.
CAUTION: If there’s a window pane, glass display case, wall hang- ing, etc. in front of your subject, the sonar may be fooled and reflect an incorrect focus distance. Preview your picture in the viewfinder to be sure the sonar provides proper focus. If it doesn’t, disconnect the sonar by pressing on the switch above the focus wheel until the red line shows. Then use the focus wheel to set your camera manually to the correct
Lighten/Darken control
If subject is too light or too dark in daylight pictures, compensate by turning the Lighten/Darken control one mark and shoot again in the same place with the same lighting. White area lightens picture, dark area darkens.
Cleaning the rollers
Open film door, depress light shield (A), | A |
and rotate the rollers. Wipe rollers with a |
|
moist |
|
water to clean rollers. |
|
Image manipulation
Image manipulation is a creative technique using
For more information about image or emulsion transfer and other creative uses for
Using FlashBars
Note that FlashBars are no longer manu- factured. For information about third- party vendors, call Americas Business Center,
Flash must be used for indoor pictures.
Effective FlashBar ranges are 10.4 inches to 20 feet.
Insert a FlashBar into the socket in the camera and push in firmly. (On
the way as FlashBar is inserted, then release it slowly.) On other models, the FlashBar socket is on the top front of the camera body above the lens or sonar.
When all five bulbs on one side are used, remove the FlashBar and turn it around for the remaining five bulbs.
IMPORTANT FLASH REMINDERS
•Set the focus distance
•Place subject close to a colorful background, if possible.
•In group pictures, have everyone about the same distance from the flash for even lighting.
•Avoid hot spots and reflections from mirrors, windows, artwork, eyeglasses, etc. reflecting the flash. Shoot at an angle rather than
Minimum lens-subject distance
To produce clear pictures, do not place your subject closer than 10.4 inches to the camera.
Additional information
We have a staff of Polaroid photography experts whose job is to help you take good pictures. Direct your camera, film and picture questions to Americas Business Center.
Call