Polaroid XS100 Powering On/Off, Recording Videos, To turn the camera on, To turn the camera OFF

POLAROID XS100 USER GUIDE

upward in the direction of the arrow No. 2.

3.To remove the Panel Cover, simply reverse the procedure in steps 1 and 2.

*Failure to properly seal your camera can result in leaks that may damage or destroy your camera. Your warranty does not cover water damage resulting from user neglect.

*The rubber seal on the Panel Cover forms the waterproof barrier to protect the camera in wet and underwater conditions. You must keep this seal clean; a single strand of hair or a single grain of sand can cause water to leak into the camera.

*After every use in salt water, you will need to rinse the outside of the product and the seal with non-salt water, then dry. Failure to rinse off salt water can cause corrosion within the camera and, in turn, damage will result.

Powering On/Off

To turn the camera ON:

1.Press and hold the Power Button

2.The camera will vibrate, and the Green LED will turn on.

To turn the camera OFF:

1.Press and hold the Power Button .

2.The camera will vibrate two seconds, and the Green LED will turn off.

Recording Videos

Before you start recording, select the video resolution by switching the Video Resolution Switch There are two HD options to select from: HD (720p 60fps or 720p 30fps) and FHD (Full HD 1080p 30fps or 960p 30fps). You can change the resolution by changing the settings with the XS100 software.

There are two methods available for starting the video record function. Recording is delayed 1-2 seconds as a short vibration indicates recording has started. The LED indicator illuminates RED throughout the recording.

6