AVerMedia Technologies technical specifications Using AVerVision530 as a PC Camera

Using AVerVision530 as a PC Camera

AVerVision530 can be used as a PC Camera. With the bundled PC Camera application, you can record video or capture still image and operate AVerVison530.

: You MUST read and follow the instructions below BEFORE connecting the USB cable.

Step 1 Check if the PC meets the minimum system requirements

Pentium®-class processor

Windows2000 Professional with Service Pack 2,

Windows XP Professional or Home, or Windows

XP Tablet PC

32 MB of RAM (64 MB recommended) 60 MB of available hard-disk space

Step 2 Install the PC Camera Application and Drivers

To install PC Camera Application and Drivers:

1.Place Installation CD into the CD-ROM drive. When the installation main screen appears, click PC Camera Applications and then follow the on screen instructions.

2.Click Finish” to complete installation. When the RegSvr32 dialog box appears, click OK. You have now installed the PC Camera Application.

For Windows2000, in order for the new software to take effect, click YES to restart PC.

3.You may now connect the USB cable.

4.When the system has detected the new hardware, you are now going to install the drivers. Just follow the on screen instructions.

5.When the Microsoft Digital Signature warning message appears, click YES (Windows2000) or Continue Anyway (WindowsXP) to continue the installation.

6.Click Finish. (WindowsXP)

Step 3 Using the PC Camera Application

To run the application, click VisionAP icon on your PC desktop or click Start > Programs > AVerVision > VisionAP.

16