AVerMedia Technologies AVerVision530 technical specifications Troubleshooting

Page 21

Troubleshooting

This section provides useful tips describing how to solve common problems while using the AVerVision530.

There is no picture on the presentation screen.

1.Check all the connectors again as illustrated in this manual.

2.Check the remote control’s on/off switch on your display output device.

3.Verify the setting of the display output device.

4.If you are using a notebook or computer, you may have to switch the source to VGA.

There is no computer signal on the presentation screen.

When you turn on the computer, it will auto-detect the type of monitor you have. During auto-detection, there won’t be any display on your presentation screen. To avoid this problem, connect your computer and all the necessary cables to the AVerVision530 first before you power on your computer.

20

Image 21

Contents Table of Contents Introduction Package ContentsAVerMedia AVerVision530 Components Back Panel Making the ConnectionsLeft Panel Connecting a VGA, Mac Display Monitor or LCD/DLP ProjectorConnecting a Computer Connecting a TVConnecting the Power Adapter Connecting a MicrophoneInserting and Ejecting a Memory Card Connecting a Computer via USB Connection Setting Up AVerVision530Arms and Overhead Light Base LightLens Rotary Dial Remote control compartmentInfrared Sensor Carrying handleUsing the Infrared Remote Control LED Power ButtonAnti-glare Night View Freeze Auto Focus Function Touch Button Control PanelTimer Function To Set the TimerTo View and Start the Timer Countdown RGB Video Output OSD Display OSD Navigation TreeMenu Functions Mode EffectExposure Check if the PC meets the minimum system requirements Using AVerVision530 as a PC CameraVisionAP User Interface Basic SettingAdvanced Setting Using AVerVision530 as a Mass StorageImage Technical SpecificationsThere is no picture on the presentation screen TroubleshootingLimitations of Warranty