Loading the film | Cleaning the rollers | 9 |
|
|
|
Use Polaroid Spectra/lmage film.
The film pack contains a
When the camera is open,
push the film door release button in the front of the camera.The film door will open. Hold the film pack by its edges only (picture 5) and slide it all the way into the camera. Close the film door and a
cardboard cover protecting the film will eject automatically.
Dirty rollers can prohibit your camera from operating correctly
and can cause a repeated spot or bar pattern in the picture.
As part of the regular mainte- nance of your camera, check that the rollers (picture 6) are clean each time you load a fresh pack of film.The developer rollers are located inside the film door. If
there is film in the camera, open the door in dim light and clean the rollers.
While turning rollers, clean them with a
5 | 6 |