Axis Communications AXIS 212 PTZ manual Dimensions, Optional accessories

www.axis.com

Technical specifications – AXIS 212PTZ/212PTZ-V Network Cameras

34051/EN/R1/0812

Camera
Models	AXIS 212 PTZ: Tamper-resistant casing
	AXIS 212 PTZ-V: Vandal-resistant casing
Image sensor	1/2” progressive scan CMOS 3.1 Megapixel
Lens	F1. 8, fixed iris, focal length: 2.7 mm
	Angle of view, horizontal: 44° – 140°
	vertical: 35° – 105°
Minimum	10 lux wide mode, 20 lux tele mode
illumination
Shutter time	1/10000 s to 1/5 s

Pan/Tilt/Zoom 3x zoom, 0.1 s from wide to tele 20 preset positions

±70° pan

±52° tilt

Max speed 400°/s

Guard Tour

Designed for continuous movement

Video
Video	MPEG-4 Part 2 (ISO/IEC 14496-2)
compression	Motion JPEG
Resolutions	160x90 to 640x480
Frame rate	Up to 30 fps in VGA at max. zoom
MPEG-4
Frame rate	Up to 30 fps in VGA at max. zoom
Motion JPEG
Video streaming	Simultaneous MPEG-4 and Motion JPEG
	Controllable frame rate and bandwidth
	VBR/CBR MPEG-4
Image settings	Compression, color, brightness, sharpness, white balance,
	exposure control, fine tuning of behavior at low light
	Text and image overlay
Audio
Audio streaming	Two-way, half-duplex
Audio	AAC LC 8 kHz 32 kbit/s
compression	G.711 PCM 64 kbit/s
	G.726 ADPCM 32 or 24 kbit/s
Audio input/	Built-in microphone, external microphone input or line input,
output	line level output

Dimensions	212 PTZ
	77 mm (3.0")
127 mm (5")	144 mm (5.7")
	212 PTZ-V
mm (5.2")	(3.7")
132	mm
	94
89 mm (3.5")	144 mm (5.7")

Network
Security	Password protection, IP address filtering, HTTPS encryption,
	IEEE 802.1X network access control
Supported	IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour,
protocols	UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP,
	TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
System integration
Application	Open API for software integration, including VAPIX®
Programming	from Axis Communications available at www.axis.com
Interface
Intelligent video	Video motion detection, audio detection
Alarm triggers	Intelligent video and external input
Alarm events	File upload via FTP, HTTP and email
	Notification via email, HTTP and TCP
	External output activation
Video buffer	9 MB pre- and post alarm
General
Casing	AXIS 212 PTZ-V: 1000 kg (2200 lb) impact-resistant casing
Processors and	ARTPEC-A, 32MB RAM, 8MB Flash
memory
Power	4.9 – 5.1 V DC max 3.6 W
	Power over Ethernet IEEE 802.3af Class 1
Connectors	RJ-45 Ethernet 10BaseT/100BaseTX PoE, DC jack
	Terminal block for 1 alarm input and 1 output
	3.5 mm mic/line in, 3.5 mm line out
Operating	5 – 40 °C (41 – 104 °F)
conditions	Humidity 20 – 80% RH (non-condensing)
Approvals	EN 55022 Class B, EN 55024, EN 61000-3-2, EN 61000-3-3,
	FCC Part 15 Subpart B Class BVCCI Class B, ICES-003 Class B,
	C-tick AS/NZS CISPR 22, EN 60950
	Power supply: UL, CSA
Weight	AXIS 212 PTZ: 504 g (1.1 lb.)
	AXIS 212 PTZ-V: 660 g (1.5 lb.)
Included	Power supply, mounting and connector kits, angled wall mount,
accessories	Installation Guide, CD with installation tools, recording software
	and User’s Manual,	Windows decoder 1-user license
More information is available at www.axis.com
Optional accessories
AXIS 295		Vertical tilt adaptor
Video Surveillance Joystick

For information on AXIS Camera Station and video management software from

Axis’ Application Development Partners, see www.axis.com/products/video/software/

©2008 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right to introduce modifications without notice.