Bosch Appliances NBN-498 operation manual Interfaces, Alarm input, Relay

Page 101

Dinion2X IP Camera

Advanced Mode en 101

 

 

9.9Interfaces

Interfaces

>Alarm input

>Relay

>COM1

9.9.1Alarm input

Configure the alarm triggers for the camera.

Select N.C. (Normally Closed) if the alarm is to be triggered by closing the contact.

Select N.O. (Normally Open) if the alarm is to be triggered by opening the contact.

Name

Enter a name for the alarm input. This is then displayed below the icon for the alarm input on the LIVEPAGE (if configured).

Action

Select the camera mode to switch to when alarm input 1 is triggered. See Section 9.8.8 Alarm Task Editor, page 100, for information on alarm actions based on alarm inputs.

9.9.2Relay

Configure the switching behavior of the relay output.

Select different events that automatically activate an output. For example, turn on a floodlight by triggering a motion alarm and then turn the light off again when the alarm has stopped.

Idle state

Select Open for the relay to operate as an N.O. contact, or select Closed if the relay is to operate as an N.C. contact.

Select

Select External device or Motion+/IVA to trigger the relay.

Bosch Security Systems

Installation and Operation Manual

AR18-10-B006 v1.1 2010.06

Page 100 Page 102
Image 101
Page 100 Page 102
Contents Dinion2X IP Camera Page Table of Contents Planning InstallationCamera set-up Browser connectionAdvanced Mode Livepage Recordings SettingsBasic Mode COM1 ALCMaintenance 123 Troubleshooting 119Technical Data 126 Operation via the browser 114Safety precautions SafetyImportant safety instructions Connection in applications FCC & Ices Information FCC & Ices complianceInformations FCC et Ices Disclaimer UL certificationVideo loss Bosch noticesCopyright TrademarksCopyrights Introduction FeaturesDinion2X IP Camera Introduction en Overview of functions System InformationProgressive scan 2 Day/Night functionTri-streaming Alarm I/OOnvif Open Network Video Interface Forum AudioBackup Power-over-EthernetConfiguration EncryptionDinion2X IP Camera System Information en DiBos 900 Series Operation with external systemsBosch Video Management System Divar 700 Series Unpacking PlanningSystem requirements Install players Network and power connector InstallationPower connection Power connectorPin Alarm socket Alarm and relay connectorAudio connectors Audio connectorsVideo BNC connector Video service monitor connectorData Data connectorPin Video iris lens DC iris lens Lens mountingMounting a camera Mounting the cameraBack focus adjustment Using the camera install menuManual-iris lens Lens adjustmentDC-iris lens Video-iris lens Reset buttonCamera menu navigation Camera set-upCamera set-up en Infrared Lens Wizard submenuSelection Description ExitNetwork submenu Defaults submenuFunction Selection Description DhcpDay/Night switching Browser connection Protected network Password protection in cameraEstablishing the connection Alarm connection Connecting to a hardware decoderLivepage Connection establishedDinion2X IP Camera Browser connection en Saving changes Basic ModeBasic Mode menu tree Password Device AccessPassword Camera nameDate/Time Confirm passwordDevice date, time and zone Time server IP addressNetwork Click Set and RebootIP address Subnet maskAudio Encoder ProfileRecording System OverviewAdvanced Mode menu tree Advanced ModeEn Advanced Mode Dinion2X IP Camera Identification GeneralCamera ID Camera nameDevice date / Device time Date/TimeDate format Daylight saving time Device time zoneCamera name stamping Display StampingTime stamping Display millisecondsVideo watermarking Alarm mode stampingAlarm message Appearance Web InterfaceLivepage Functions Logging Encoder Profile EncoderPrivacy Masks Isdn 2B Profile ConfigurationIsdn 1B Profile nameExpert Settings Video resolutionEncoding interval 4CIF/D1Default Encoder Streams Select H.264 Settings264 BP+ HW decoder MP Low Latency 264 BP+ 264 MP HW decoder Low LatencyJpeg stream Mode Camera2 ALC Shutter/AGC 4 Day/night Priority EnhanceIR contrast Color burstColor Saturation Installer OptionsSynchronization Ticker barCamera buttons Restore all defaultsCamera LED Show test patternDevice manager Storage ManagementRecording media ISCSI MediaActivating and Configuring Storage Media Deactivating Storage Media Formatting Storage MediaRecording Profiles Stream profile settingsRecording includes Standard recordingStream Alarm recordingRetention Time Holidays Recording SchedulerWeekdays Profile names Recording StatusActivate recording Recording statusAlarm Connections AlarmVideo transmission Select 10 in the Number of destination IP address list boxRemote port Video outputSSL encryption DecoderAuto-connect AudioVideo Content Analyses VCA Analysis type VCA configuration- ProfilesAggregation time s Sensitivity Motion detectorDebounce time 1 s Minimum object sizeSelecting the area Tamper detectionGlobal change slider Trigger delay sGlobal change Scene too brightReference check Scene too darkScene too noisy Appearing edges Deleting Holidays VCA configuration ScheduledDinion2X IP Camera Advanced Mode en Delay s VCA configuration Event triggeredTrigger Trigger activeAudio alarm Audio AlarmSignal Ranges NameAlarm E-Mail Test e-mail Destination addressSender name Alarm Task Editor Relay Alarm inputInterfaces 3 COM1 Automatic IP assignment NetworkDetails Video transmission DNS server addressHttp browser port Https browser portRCP+ port Interface mode ETHTelnet support Network MSS ByteHost name Enable DynDNSUser name Force registration nowAdvanced AuthenticationSnmp host address / 2. Snmp host address Snmp trapsMulticasting EnableRtsp port Multicast AddressPort Jpeg PostingStreaming Multicast packet TTLFTP server password FTP server loginPosting interval FTP server IP addressFirmware ServiceMaintenance SSL certificate ConfigurationSystem Overview Maintenance logLicenses Processor load Operation via the browserLivepage View Control Image selectionDigital I/O System Log / Event LogAudio communication Recording video sequencesRunning recording program Controlling playback RecordingsBookmarks Trick modeSlide control Function test TroubleshootingMalfunction Possible causes Solution Resolving problemsHW decoder option on Encoder StreamsLivepage Functions For example 192.168.0.80/version Customer serviceTesting the network connection MaintenanceCommunication with Terminal Program Data TerminalCommand Inputs Configuring the TerminalAssigning an IP Address 192.168.0.1Repairs RebootTransfer and disposal Additional ParametersType number NBN-498 Technical DataSpecifications PAL/NTSC En Technical Data Dinion2X IP Camera 13.1.1 Dimensions Recommended lenses AccessoriesPower transformers ARP GlossaryCIF DNSGbic FTPHttp HttpsIgmp IeeeIsdn JpegMIB MACMPEG-4 MSSSnia SFPSnmp SntpUDP TTLURL UTPPage Bosch Security Systems
Related manuals
Manual 7 pages 2.76 Kb

NBN-498 specifications

The Bosch NBN-498 is a state-of-the-art appliance that exemplifies Bosch's commitment to quality, innovation, and efficiency. This model is particularly favored for its seamless integration into modern kitchens, making it a fantastic choice for homeowners looking for both functionality and style.

One of the standout features of the Bosch NBN-498 is its advanced thermodynamic system, which ensures uniform heat distribution throughout the cooking process. This technology not only enhances cooking results but also improves energy efficiency. The appliance is designed to reach optimal cooking temperatures faster, reducing energy consumption without compromising performance.

The NBN-498 also boasts a versatile cooking mode selection, including bake, broil, roast, and even air frying capabilities, offering extensive culinary options for home chefs. Its intuitive digital control panel is user-friendly, allowing for precise temperature and time adjustments. This feature empowers users to customize their cooking experience based on specific recipes and preferences, elevating the culinary results.

Another notable characteristic of the Bosch NBN-498 is its spacious interior, which can accommodate large dishes and multiple cooking racks. This makes it ideal for preparing meals for families or entertaining guests. Additionally, the easy-to-clean interior surface and removable racks simplify maintenance, ensuring the appliance remains in optimal condition over time.

Bosch places a strong emphasis on safety, and the NBN-498 reflects this with its built-in safety features, including a child lock and an automatic shut-off function. These features provide added peace of mind, especially in households with children.

In terms of design, the NBN-498 showcases a sleek and modern aesthetic that complements various kitchen styles. Its stainless steel finish not only provides durability but also adds a touch of elegance to the kitchen environment.

Overall, the Bosch NBN-498 is an excellent choice for those seeking a reliable and efficient appliance that combines modern technology with user-friendly features. With its innovative cooking modes, spacious interior, and focus on safety, this model is sure to enhance the cooking experience and help users achieve culinary excellence in their homes.
Top Page Image Contents