Bosch Appliances NBN-498 operation manual Device time zone, Daylight saving time

Dinion2X IP Camera Advanced Mode en 57

2.Enter the current time or click Sync to PC to apply the system time from your computer to the device.

Note:

It is important to ensure that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording.

Device time zone

Select the time zone in which the system is located.

Daylight saving time

The internal clock can switch automatically between normal and daylight saving time (DST). The device already contains the data for DST switch-overs up to the year 2015. Use this data or create alternative time saving data, if required.

Note:

If a table is not created, there is no automatic switching. When editing the table, note that values occur in linked pairs (DST start and end dates).

First, check the time zone setting. If it is not correct, select the appropriate time zone for the system:

1.Click Set.

2.Click Details. A new window opens showing an empty table.

3.Click Generate to fill the table with the preset values from the camera.

4.Select the region or the city which is closest to the system's location from the list box below the table.

5.Click one of the entries in the table to make changes. The entry is highlighted.

6.Click Delete to remove the entry from the table.

7.Choose other values from the list boxes under the table, to change the selected entry. Changes are immediate.

8.If there are empty lines at the bottom of the table, for example after deletions, add new data by marking the row and selecting values from the list boxes.

Bosch Security Systems Installation and Operation Manual AR18-10-B006 v1.1 2010.06