Argus Camera DC2200 manual Recording a Movie, Compact Flash card, How to use the Flash strobe

Page 20

User Guide for DC2200

Recording a Movie

You can select the Movie mode in the Quality selection mode. Press the Mode button once, press the Select button 4 times, you can see the Movie icon on. Press Mode button until you see the film counter. Now the Movie mode is set.

Press the shutter and hold, you can hear beep beep sound. Now the movie is being taken and saving to the internal memory. You can stop taking movie at any time before it is automatically stopped.

The file size is about 980KB( if it is automatically stopped). The movie play back time is not less than 25s related to the image information. (up to 35s).

Compact Flash card

When a Compact Flash card is inserted, images or movies are all stored directly into the Compact Flash memory card instead of the internal SDRAM memory. When it is full, the film icon and the ‘MEM’ icon are blinking ( in the status LCD) and you will be unable to acquire any more images until you delete some files. You can plug in or plug off the CF card when the unit is power on.

Only CF card type 1 is suitable for this camera.

Recommend to use 64MB or lower CF memory card. Good brandname eg. SanDisk, Kodak.

The images are kept even the battery power is taken off.

The internal memory is still kept if the battery power is not turned off.

If there are a lot of files (say more than 500), it will take up to 1 minute to read the file names by the MyCamera Explorer.

How to use the Flash strobe

vTurn on the flash icon if you want to take a photo indoor or at night.

vThe charging time is longer if the battery power is low

vIt will not turn on the flash strobe if it is connected to the USB cord

vThe best distance between the object and the camera is about 1m to 2m subject to the environment light condition.

vThe flash strobe will flash if the environment is quite dark. So it may not flash even you have set it to auto flash mode. Then you need to hold the camera firmly for taking photos indoor and at night.

vIf the battery power is too low, the flash strobe function is disabled. Change the batteries to fresh ones if you really want to use flash strobe.

vIf the light intensity is not too low, it is recommended not to use flash strobe. This camera can reduce the shutter speed to get enough exposure. It can make the color more natural. A tripod is needed if you want a very good photo.

19

Image 20
Contents User Guide for DC2200 Contents VGA Digital Camera DC2200 User Guide Package contains of below itemsTrademark acknowledgements Electromagnetic Compatibility NoticePrecautions Battery Used for DC2200 Camera Nomenclature Connect the camera unit by USB cable Connect the PC and the camera with the USB cordTV Mode Change the camera internal settings Review Reviewing Pictures Slide Show Display stored pictures one by one Info Information of internal memory Lang Select English, Spanish, Deutch, French or Japanese Status LCD display Status LCD flow chart Operating mode Ready to take a photoTake a photo Change Picture quality Change TV system Delete All the photosSelf Timer mode Flash strobe modeBattery Low Detection Front LED indicationCompact Flash card How to use the Flash strobeRecording a Movie Install the DC2200 Camera driver to the PC Install the MyCamera driver to the Mac computerInstall the QuickTime 4.0TM to the PC Save the image files to the PC hard driveInstall the Arcsoft Programs DC2200 DC2200 Use of PhotoFantasy Use of PhotoStudio and PhotoPrinter Product Specifications HardwareResponsible Party in USA Software For both PC and Mac computerSystem Requirements