Argus Camera DC2200 manual Precautions

Page 5

User Guide for DC2200

Precautions :

Thank you for selecting DC2200 dual mode digital camera. Please read the instructions carefully for a thorough understanding before taking pictures.

This camera is not resistant to water and should not be used outdoors in snow or rain. If accidentally dropped in water, please quickly pour out the water. Let it to dry by sunlight or by air-blower.

Protect it from excessive humidity. It will wet the lens and the picture is blur.

Do not attempt to disassemble the camera yourself. Always take it to an authorized service facility for repair.

Remove the battery if you do not expect to use the camera for 1 month or longer.

When storing the camera, wrap it in a clean, soft cloth and place in a cool, dry, dust- free place. Also it should not be placed in very hot temperature condition or in direct sun light.

The battery may explode or cause burns if disassembled, recharged, shorted, exposed to high temperature, or disposed of in fire.

Take care on the lens. Use special cloth to clean it.

Condensation is a problem when bringing cold equipment into a warm room. Try to put the camera in plastic bag so condensation forms on the outside of the bag.

If nothing at all is displayed in the LCD panel, the battery may be inserted in opposite polarity.

If the LCD display is damaged, do not touch it.

Taking out the battery will cause the loss of internal memory (not for the CF card). Make sure you have uploaded the photos to the PC before taking out any of the batteries.

4

Image 5
Contents User Guide for DC2200 Contents Package contains of below items VGA Digital Camera DC2200 User GuideElectromagnetic Compatibility Notice Trademark acknowledgementsPrecautions Battery Used for DC2200 Camera Nomenclature Connect the PC and the camera with the USB cord Connect the camera unit by USB cableTV Mode Change the camera internal settings Review Reviewing Pictures Slide Show Display stored pictures one by one Info Information of internal memory Lang Select English, Spanish, Deutch, French or Japanese Status LCD display Operating mode Ready to take a photo Status LCD flow chartChange Picture quality Take a photoDelete All the photos Change TV systemFlash strobe mode Self Timer modeFront LED indication Battery Low DetectionCompact Flash card How to use the Flash strobeRecording a Movie Install the MyCamera driver to the Mac computer Install the DC2200 Camera driver to the PCInstall the QuickTime 4.0TM to the PC Save the image files to the PC hard driveInstall the Arcsoft Programs DC2200 DC2200 Use of PhotoFantasy Use of PhotoStudio and PhotoPrinter Hardware Product SpecificationsResponsible Party in USA Software For both PC and Mac computerSystem Requirements