Aquatica AD80 manual Latches

Page 13

Of the Latches:

The two latches of the AQUATICA Digital housing are designed to have a locking action to prevent ac- cidental opening. Always ensure that the locking mechanism is secure. Watch for the build-up of cor- rosion or salt residue around the latches. This will appear as a white material. Lubricate the latches with a small amount of WD-40 to remove the corrosion or salt residue build-up.

Of the O-Rings:

The O-rings that need to be maintained on a regular basis are the main housing O-ring and the O-ring on the lens port.

The main O-ring should be cleaned on a daily basis and the port O-ring should be cleaned daily or each time the port is changed.

Of the sacrificial anodes:

The three anodes attached to the bottom parts of the housing are there to prevent corrosion due to electrolysis, as time goes they will deteriorates and need replacement, contact Aquatica for replace- ment and procedure of their installation.

TO SERVICE O-RINGS ON THE HOUSING MAIN O-RING, PORTS AND EXTENSION RINGS

1.Remove the O-ring. It is important never to use a sharp instrument when removing an O-ring as this may damage the O-ring groove or the O-ring itself. A bobby pin or edge of a credit card works well.

2.Once the O-ring is removed, it should be examined for damage. Check to make sure that the O-ring is free of nicks and cuts and that it retains its original round profile. O-rings that appear to be damaged should be discarded immediately and replaced with new O-rings.

3.Rinse the O-ring with fresh water and dry it with a clean lint free cloth.

4.Clean the O-ring groove (where the O-ring sits) with a Q-tip. Be sure to remove any lint the Q-tip may leave behind. Inspect the groove for damage.

5.Wipe the part of the housing that the O-ring seals against with a clean lint-free cloth.

6.Re-grease the O-ring with a thin layer of O-ring grease until it appears to be smooth and shiny. Do not over grease it.

Use just enough grease so the O-ring will pull smoothly through your fingers. Excessive amounts of grease will only serve to attract dirt to the o-ring.

7.Make sure that the O-ring is properly (envenly) installed in the O-ring groove.

8.To reinstall the clean and lubricated O-ring, place the entire O-ring over the groove and start by pushing the O-ring in at each corner then, push the O-ring at each side and finally, work in the rest of the O-ring. Never start at one end and work your way around the O-ring. This places uneven tension on the O-ring which may cause the O-ring to stretch resulting in excess O-ring, which will have no place to go.

There are internal O-rings on the housing controls as well. These O-rings are not as susceptible to damage as they are not exposed but they do require yearly maintenance and are not user service- able. The housing should be returned to AQUATICA or to an authorized AQUATICA service facility for this annual maintenance. Check the Web site www.aquatica.ca for the closest service center.

An internal moisture alarm is available for your AQUATICA Pro Digital housing (Product # 18796). This alarm is available through your authorized AQUATICA dealer and can be easily installed.

Image 13
Contents Aquatica AD80 Foreword Lens Lock Release Lever Controls in Detail Controls in detail Preparation of the Housing FeaturesLubricate the port O-ring seal Clean the portPreparation of the Lens Focus Gear installationBefore closing the housing always ensure that Camera Preparation and InstallationTo close the housing simply To remove a lens, simply Lens InstallationTaking a Picture Mounting and Attaching FlashesCare and Maintenance Focusing Mode Using the HousingTransporting the Aquatica Pro Digital housing HousingLatches Aquatica D80 Lens PORT/ Gear Chart Recommended Aquatica Accessories Warranty

AD80 specifications

The Aquatica AD80 is a state-of-the-art underwater housing designed specifically for professional photographers looking to capture stunning images while diving. This advanced housing is compatible with the popular Canon EOS 80D DSLR camera, allowing users to utilize the camera's capabilities in demanding underwater environments.

One of the main features of the Aquatica AD80 is its durable construction. Made from high-quality anodized aluminum, this housing offers superior corrosion resistance, ensuring longevity even in saltwater conditions. The housing is designed to withstand depths of up to 90 meters (295 feet), allowing photographers to explore deep underwater while capturing breathtaking shots.

The AD80 is equipped with a double O-ring system that guarantees a watertight seal, minimizing the risk of leaks. The housing features easy-to-use mechanical controls that provide access to all essential camera functions without submenu navigation. This user-friendly design allows photographers to make quick adjustments while focusing on their subjects.

Another significant feature of the Aquatica AD80 is its integrated flash system. The housing comes with fiber optic ports that facilitate the use of external strobe lighting, which is vital for achieving well-lit and vibrant images in the often challenging underwater lighting conditions. Additionally, the housing includes ports for various lenses, enabling photographers to switch between wide-angle, macro, and standard lenses to adapt to different photographic needs.

Incorporating advanced technologies, the AD80 features customizable settings that allow for personalized adjustments to suit individual shooting styles. The housing includes a built-in buoyancy system that provides additional stability when shooting, minimizing the risk of unintentional camera movement.

Critically, the Aquatica AD80 is designed to be as compact and lightweight as possible, making it easier for photographers to transport and handle underwater. The ergonomic design ensures comfort during long dives, with strategically placed controls and grips that enhance ease of use.

With its combination of robust construction, thoughtful design, and advanced features, the Aquatica AD80 represents a perfect solution for underwater photographers seeking to push their creative boundaries while capturing the beauty of marine life. Whether for professional projects or personal adventures, this housing is an indispensable tool for any serious underwater photographer.