Camera Preparation and Installation

CAMERA PREPARATION AND INSTALLATION

1.Set the Focus Mode Selector to the desired position

2.Important Note: “D” Clips that attach the strap should be removed or tucked away prior to installing the cam- era in the housing.

3.Make sure the ON / OFF /ILLUMINATOR knob (key # 3) is in theon position.

4.Remove the saddle from the housing and carefully place the camera on it and ensure the camera is properly installed and aligned as follows:

a)The camera is properly aligned and secured against rotation or movement.

b)Align the Tripod Socket of the camera with the mounting screw. Tighten the mounting

screw securely while ensuring that the camera position is not altered. set arresting block as per drawing at right.

c) Slide the quick release tray back into place and rotate locking knob clockwise to secure tray into position.

CLOSING OF THE HOUSING

Once the camera is secure on the saddle inside the front half of the housing, simply slide the housing’s hot shoe connector onto the hot shoe base of the camera as seen in drawing at right.

Before closing the housing always ensure that:

1. The main O-ring on the front half of the housing is clean,lubricated and properly seated for a positive seal.

2.The sealing surface on the rear half of the housing is clean and free from any scratches or physical damage.

3.All cords or wires are tucked in so that they do not interfere with the closing of the housing.

To close the housing simply:

I. Join the front and rear halves of the housing using the two dowel pins at the bottom of the housing as a guide.

ii.Hold the housing with both hands and look around the sealing surface to ensure that the O-ring remained properly seated and that no cords, wires or “D-rings” are caught between the edges.

iii.First close the two sides latches simultaneously, then the top one. reverse the process to open housing

CAUTION: if you feel any resistance as you attempt to close the latches, do not force the closure. Check for an obstruction and try again.

iv. Verify that the safety locking mechanisms of the latches are properly engaged to avoid any accidental opening.

AD80 specifications

The Aquatica AD80 is a state-of-the-art underwater housing designed specifically for professional photographers looking to capture stunning images while diving. This advanced housing is compatible with the popular Canon EOS 80D DSLR camera, allowing users to utilize the camera's capabilities in demanding underwater environments.

One of the main features of the Aquatica AD80 is its durable construction. Made from high-quality anodized aluminum, this housing offers superior corrosion resistance, ensuring longevity even in saltwater conditions. The housing is designed to withstand depths of up to 90 meters (295 feet), allowing photographers to explore deep underwater while capturing breathtaking shots.

The AD80 is equipped with a double O-ring system that guarantees a watertight seal, minimizing the risk of leaks. The housing features easy-to-use mechanical controls that provide access to all essential camera functions without submenu navigation. This user-friendly design allows photographers to make quick adjustments while focusing on their subjects.

Another significant feature of the Aquatica AD80 is its integrated flash system. The housing comes with fiber optic ports that facilitate the use of external strobe lighting, which is vital for achieving well-lit and vibrant images in the often challenging underwater lighting conditions. Additionally, the housing includes ports for various lenses, enabling photographers to switch between wide-angle, macro, and standard lenses to adapt to different photographic needs.

Incorporating advanced technologies, the AD80 features customizable settings that allow for personalized adjustments to suit individual shooting styles. The housing includes a built-in buoyancy system that provides additional stability when shooting, minimizing the risk of unintentional camera movement.

Critically, the Aquatica AD80 is designed to be as compact and lightweight as possible, making it easier for photographers to transport and handle underwater. The ergonomic design ensures comfort during long dives, with strategically placed controls and grips that enhance ease of use.

With its combination of robust construction, thoughtful design, and advanced features, the Aquatica AD80 represents a perfect solution for underwater photographers seeking to push their creative boundaries while capturing the beauty of marine life. Whether for professional projects or personal adventures, this housing is an indispensable tool for any serious underwater photographer.