STEP 2. (Connecting the PYRO 1394 WebCam)
Make sure the PYRO 1394 WebCam CD is in your CD ROM drive.
Connect the PYRO 1394 WebCam Device directly to your FireWire/iEEE port on the motherboard or FireWire/iEEE
The following windows will appear as you connect the PYRO 1394 WebCam. It may take a minute or two to configure each component. Please follow these steps accord- ingly:
Note: Windows 2000 prompts will look slightly different for all the pictures depicted here.
• Click next. Your PYRO 1394 WebCam Hardware is being installed.
Note: When you click “Finish”, Audio Drivers necessary for Video Conferencing will also be installed.
• Click Finish.
6