Taser IT-INST-TC-001 manual Using the Taser CAM, Taser CAM PC Software Installation

Page 8

TASER CAM User Manual

Note: Remember that the X26 is being powered by the TASER CAM, and as with any X26, it must not be without power for an extended period of time (4 or more hours) in order to maintain the integrity of the software and clock. If the TASER CAM is removed from a X26, a DPM/XDPM should be inserted to keep the unit continually powered. The X26 (with weapon software that supports the TASER CAM) will support older version DPM/XDPMs.

Using the TASER CAM

The functions and use of the X26 does not change with the addition of a TASER CAM. However, there are a few points to remember:

•The TASER CAM will begin to record approximately one and a half seconds after the safety is put in the up (ARMED) position and stop recording when the safety is put in the down (SAFE) position.

•Do not block the lens of the TASER CAM. If the lens is blocked, “88” will flash on the CID and the laser will flash. With a two-handed hold, the user might unintentionally block the lens, particularly when wearing gloves. Note: The CID and laser also may flash in conditions of extreme darkness even if the lens is not blocked. The TASER CAM will still be able to record video if the infrared light is not covered.

•Hold the weapon as steady as possible while recording.

•Recharge the TASER CAM before the remaining battery capacity is under 20 percent.

TASER CAM PC SOFTWARE INSTALLATION

There are two main steps in the software installation process. You must install the software first, and then install the drivers.

1.Do not plug the USB cable into the computer at this step.

2.Close all open applications.

3.Insert the TASER CAM CD. The TASER CAM Setup Wizard Screen should appear automatically (Figure 1). If it does not, go to the CD/DVD drive and click setup.exe.

IT-INST-TC-001 Rev: C

August 28, 2006

Page: 8 of 37

 

©2006 TASER International, Inc. All rights reserved.

 

 

 

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents IT-INST-TC-001 Rev C August 28 Table of Contents IT-INST-TC-001 Rev C August 28 Taser CAM Features Taser CAM a General OverviewCharging the Taser CAM Charging the Taser CAM Using the Wall Power Charging CableMinimum System Requirements Charging the Taser CAM Using the PC USB Download Cable Testing the Taser CAM Operating the Taser CAMUsing the Taser CAM Taser CAM PC Software InstallationIT-INST-TC-001 Rev C August 28 Click Next to continue IT-INST-TC-001 Rev C August 28 Installation status displays Figure Taser CAM Driver Installation Click Next to continue IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 Taser CAM Downloading Downloading Video Files from the Taser CAMClick the Download Taser CAM link IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 View Records IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 Cleaning Lens BatteryUSE and Care StorageTroubleshooting the Taser CAM CAMDriver IT-INST-TC-001 Rev C August 28

IT-INST-TC-001 specifications

The Taser IT-INST-TC-001 is a cutting-edge electronic control device developed by Axon Enterprise, aimed primarily at law enforcement agencies and security personnel. This innovative tool offers a non-lethal means to subdue individuals who may pose a threat, providing a safer alternative to traditional methods of restraint.

One of the main features of the Taser IT-INST-TC-001 is its advanced deployment system. The device can discharge concentrated electrical energy, allowing law enforcement officers to incapacitate a target from a distance of up to 25 feet. This range provides officers with a crucial safety buffer, ensuring they can respond to potentially dangerous situations while minimizing the risk of injury to themselves and bystanders.

The IT-INST-TC-001 incorporates smart technology, enhancing its functionality and usability. Integrated with Axon’s powerful software systems, the Taser can connect wirelessly with other devices and applications, allowing for real-time data collection and analysis. This feature improves situational awareness and can provide critical information during encounters, making it an indispensable tool for police officers in the field.

In terms of characteristics, the Taser IT-INST-TC-001 is designed with user experience in mind. The device is lightweight and ergonomic, making it easy to carry and handle during high-pressure situations. Additionally, it features a robust construction that ensures durability, even in the most challenging environments.

The Taser's safety features are equally noteworthy. It includes an automatic shut-off mechanism that activates after a designated duration, preventing unnecessary harm to the individual experiencing the electrical discharge. Visual and audio indicators help users manage their usage effectively and communicate their actions to those around them.

Furthermore, the IT-INST-TC-001 does not rely solely on the traditional barbed probes commonly associated with older Taser models. Instead, advancements in technology mean that it can operate using both probe and drive-stun modes, giving officers flexibility in how they choose to engage a target.

Overall, the Taser IT-INST-TC-001 is a revolutionary tool equipped with state-of-the-art technology that ensures public safety while minimizing the risks associated with confrontational scenarios. Its combination of effective range, smart connectivity, and user-centric design makes it an essential addition to modern law enforcement practices, striving towards a safer and more effective means of maintaining order.
Top Page Image Contents