Taser IT-INST-TC-001 manual Minimum System Requirements, Charging the Taser CAM

Page 5

TASER CAM User Manual

position. Note: There is an approximately 1.5-second delay between the safety being placed in the up (ARMED) position and when the TASER CAM begins to record.

•The TASER CAM contains the video and audio records; the X26 contains the firing records. Because these data are kept in different places, it is preferred to use the same TASER CAM and X26 together.

•There is a distinct difference between the TASER CAM battery and a DPM/XDPM. The TASER CAM supplies less voltage to the X26 than a standard X26 DPM/XDPM, so the X26’s Low Intensity Lights may flash when the unit is firing. This is normal and DOES NOT indicate a low battery or a low power output.

MINIMUM SYSTEM REQUIREMENTS

Windows 2000/XP 128 MB of RAM

1 GB of available disk space Internet access (recommended) USB 2.0 port

Note: It is advisable to not use USB hubs. Due to variations in hub designs, they are not as reliable as computer USB ports for use with TASER CAM software.

Windows Media Player 9.0 or later

CHARGING THE TASER CAM

Note: The TASER CAM must be fully charged using the wall power charging cable, not the USB, prior to the first use (before it is inserted into a X26). It is advisable to download and save the X26’s firing logs before upgrading the weapon software.

After the initial charging cycle is complete, there are two ways to recharge the TASER CAM: through a wall power charging cable or a PC USB download cable. Depending on the amount of charge in the battery, it may take up to 5 hours for the TASER CAM to fully charge. Charging can be accomplished with the TASER CAM in the X26 or independently (with the TASER CAM out of the X26).

Charging the TASER CAM Using the Wall Power Charging Cable

1.Connect the wall power cable to the TASER CAM.

2.Connect the wall power cable to a wall outlet.

3.A green light near the TASER CAM lens will flash to indicate charging.

4.When charging is complete, the green light will remain steady.

IT-INST-TC-001 Rev: C

August 28, 2006

Page: 5 of 37

 

©2006 TASER International, Inc. All rights reserved.

 

 

 

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents IT-INST-TC-001 Rev C August 28 Table of Contents IT-INST-TC-001 Rev C August 28 Taser CAM a General Overview Taser CAM FeaturesCharging the Taser CAM Charging the Taser CAM Using the Wall Power Charging CableMinimum System Requirements Charging the Taser CAM Using the PC USB Download Cable Operating the Taser CAM Testing the Taser CAMTaser CAM PC Software Installation Using the Taser CAMIT-INST-TC-001 Rev C August 28 Click Next to continue IT-INST-TC-001 Rev C August 28 Installation status displays Figure Taser CAM Driver Installation Click Next to continue IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 Downloading Video Files from the Taser CAM Taser CAM DownloadingClick the Download Taser CAM link IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 View Records IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 IT-INST-TC-001 Rev C August 28 Battery Cleaning LensUSE and Care StorageCAM Troubleshooting the Taser CAMDriver IT-INST-TC-001 Rev C August 28

IT-INST-TC-001 specifications

The Taser IT-INST-TC-001 is a cutting-edge electronic control device developed by Axon Enterprise, aimed primarily at law enforcement agencies and security personnel. This innovative tool offers a non-lethal means to subdue individuals who may pose a threat, providing a safer alternative to traditional methods of restraint.

One of the main features of the Taser IT-INST-TC-001 is its advanced deployment system. The device can discharge concentrated electrical energy, allowing law enforcement officers to incapacitate a target from a distance of up to 25 feet. This range provides officers with a crucial safety buffer, ensuring they can respond to potentially dangerous situations while minimizing the risk of injury to themselves and bystanders.

The IT-INST-TC-001 incorporates smart technology, enhancing its functionality and usability. Integrated with Axon’s powerful software systems, the Taser can connect wirelessly with other devices and applications, allowing for real-time data collection and analysis. This feature improves situational awareness and can provide critical information during encounters, making it an indispensable tool for police officers in the field.

In terms of characteristics, the Taser IT-INST-TC-001 is designed with user experience in mind. The device is lightweight and ergonomic, making it easy to carry and handle during high-pressure situations. Additionally, it features a robust construction that ensures durability, even in the most challenging environments.

The Taser's safety features are equally noteworthy. It includes an automatic shut-off mechanism that activates after a designated duration, preventing unnecessary harm to the individual experiencing the electrical discharge. Visual and audio indicators help users manage their usage effectively and communicate their actions to those around them.

Furthermore, the IT-INST-TC-001 does not rely solely on the traditional barbed probes commonly associated with older Taser models. Instead, advancements in technology mean that it can operate using both probe and drive-stun modes, giving officers flexibility in how they choose to engage a target.

Overall, the Taser IT-INST-TC-001 is a revolutionary tool equipped with state-of-the-art technology that ensures public safety while minimizing the risks associated with confrontational scenarios. Its combination of effective range, smart connectivity, and user-centric design makes it an essential addition to modern law enforcement practices, striving towards a safer and more effective means of maintaining order.
Top Page Image Contents