ST & T manual Chapter Three Connecting IP Camera WCAM71, Local Network LAN

Chapter Three: Connecting IP Camera WCAM71

This Chapter contains step-by-step instruction to connect IP camera WCAM71P to your network.

Local Network (LAN)

1.Plug in the power supply.

2.Connect to your network with a RJ-45 Cable.

3.IP Camera WCAM71’s default IP address is 192.168.0.114.

4.Connect IP Camera WCAM71 to your local network, set the IP in the same network. You should be able to view the image.

5.If the IP address for your IP Camera WCAM71 and your Computer are different, please change them under the same network (See “Chapter Four”, “Network Configuration”).

6.Change your IP on your computer.

You can set a fixed value for your IP address. To set a fixed IP, right click on < My Network Place > < Properties >.

© 2003 ST&T Group. All rights reserved. 7