耟
Chapter Six: FAQ
Q:IP Camera WCAM71 cannot show image.
譗 Reset IP camera WCAM71 and
蠗 Try to set image parameters as QVGA (320x240) and low quality. Sometimes the condition of network is bad, and the image is not complete. The browser only shows complete image.
Q:Sometimes the Network setting doesn’t work.
A:Some IP address are reserved – “255.255.255.255”, “0.0.0.0”, “127.0.0.0”, “127.0.0.1” and “X.X.X.255”. You can’t use these IP address.
© 2003 ST&T Group. All rights reserved. | 16 |