Ashly VCM-88E manual Specifications

Operating Manual - VCM-88, VCM-88E, RD-8, RW-8 Level Controllers

11. Warranty Information

We thank you for expression of confidence in Ashly products. The unit you have just purchased is protected by a limited five year warranty. To establish the warranty, you must first complete and mail the warranty card attached to your product.

Fill out the information below for your records.

Model Number ______________________

Serial Number _______________________

Dealer______________________________

Date of Purchase _____________________

Dealer’s Address _____________________

___________________________________

___________________________________

Dealer’s Phone ______________________

Salesperson _________________________

12. SPECIFICATIONS:

12.1Input

Input Type: 1/4" TRS (VCM-88), Euroblock (VCM-88E)

Input Impedance: 20K ohm balanced, 10K ohm unbalanced

Max input level: +23dBu

Input jack may be internally selected as a single in/out insert

12.2Channel Outputs

Output Type: 1/4" TRS (VCM-88), Euroblock (VCM-88E)

Output Impedance: 200 ohm pseudo-balanced, 100 ohm unbalanced

Max output level: +22dBu

12.3Master Output

Output Type: 1/4" TRS (VCM-88), Euroblock (VCM-88E)

Output Impedance: 200 ohm pseudo-balanced 100 ohm unbalanced

Max output level: +22dBu

12.4Audio Performance Nominal Gain: 0dB +/-0.5dB Gain Range: +20dB to -75dB

Frequency Response: +/-0.2dB 20Hz-20KHz

THD: <0.05% at 0dBu, 20Hz-20KHz Output Hum & Noise:

<-94dBu 20Hz-20KHz unweighted Crosstalk: <-80dB at 20KHz

12.5Signal Present

Green LED turns on at -20dBu

12.6Limiter

Threshold Range: -23dBu to +22dBu

Compression Ratio: 10:1

12.7RD-8 Data Input

Input Type: XLR (VCM-88), Euroblock (VCM-88E) pin 2=data, pin 3=+V, pin 1=ground

Data Format: 2Vp raised-cosine,

12.8RS-232 Input

Input Type: D-Sub 9 pin female pin 3=data, pin 5=ground

1 start, 9 data, 1 stop bits at 9600 baud

12.9DC Control Inputs

Input Type: DB 15-pin female connector (VCM-88) Euroblock (VCM-88E)

Control Voltage: -4V to +15V provided for external 10K ohm potentiometers

12.10Overall

Size: 19" x 1.75" x 6" (483mm x 44mm x 152mm)

Power Requirements: 100-125VAC, 50-60Hz 18W (240V available)

Shipping Weight: 10 lbs. (4.5kg)

Net weight: 6.9 lbs. (3.1kg)

12.11RD-8, RW-8 Specifications Fader Range: +10dB to -75dB (master fader at 0dB)

Data/Power Connector: Male XLR jack Max Data Cable Length:

1500 ft. of 24 ga. twisted pair

Data Format: 9600 baud, 2Vp raised cosine Data crosstalk to audio:

<-110 dB along 1000' of 150 ohm shielded cable

Power Requirements:

Phantom powered by VCM-88(E)

Shipping Weight: 3 lbs. (1.4kg)

13