G e t t i n g s t a r t e d

Input device

You can operate the car kit using the input device. The device is provided with the Navi wheel that you can turn or press.

Turn the wheel to adjust the volume when you are using the mobile phone or music device connected to the car kit.

Press the wheel for other tasks, for example, to handle calls.

Switch the car kit on or off

If you are not certain whether the ignition sense wire is connected or not, consult with the technician who installed the car kit.

Switch on

If the ignition sense wire is connected, turn on the car ignition. When the car kit is switched on, the indicator light of the input device turns on.

If the ignition sense wire is not connected, press and hold the Navi wheel for about 2 seconds. Alternatively, turn on the ignition, start driving, and wait until the built-in motion sensor switches the car kit on automatically.

After the car kit is switched on, it tries to make a Bluetooth connection to the mobile phone that was last used with it.

Switch off

If the ignition sense wire is connected, turn off the car ignition. If you have a call in progress on your mobile phone connected to the car kit, the car kit switches off after you end the call.

If the ignition sense wire is not connected and you are not using your phone connected to the car kit for calling, do one of the following:

7

Page 7
Image 7
Nokia CK-100 manual Input device, Switch the car kit on or off, Switch on, Switch off