HOW TO OPERATE
1.Turn the unit on by pressing in the button marked I .You may encounter a buzzing noise when powering up. The system just reminds you that you have unused channels (no camera connected)
2.FULL SCREEN MODE:
-Pressing CH1 - 4 key will display the desired channel in full screen
-Press MODE key to go back to QUAD mode
3.PIP MODE:
-Press MODE key once will go to PIP1 mode
-Press MODE key twice will go to PIP2 mode
-Press MODE key three times will go back to PIP1 mode (with auto switching)
-Press MODE key four times to go back to the main QUAD screen
|
|
|
4.DEFINING PIP CHANNELS:
-When in PIP1/PIP2 mode press and hold MODE key for
-Press CH1 or CH2 
key to select different picture for CHANNEL 1
-Press CH3 or CH4 
to switch left and right and you can change the image for the PIP windows by pressing 
key
-Press MODE key again to save settings and quit
5.ZOOM FUNCTION:
*Performed in QUAD/PIP1/PIP2/FULL screen mode:
-Press the ZOOM key, a ZOOM window appears
-Press the
key to adjust the position of the ZOOM window
-Press the ENTER key to zoom in the selected area
-Once zoomed in you can still adjust the area by using the
key
-Press the ZOOM key again to zoom out
6.FREEZE FUNCTION:
*Performed in QUAD/PIP1/PIP2 screen mode:
-Press the FREEZE key, F1234 is displayed in the top left corner
-Press the CH1 - CH4 keys to freeze the desired camera.
-Pressing the same CH key will unfreeze it
-Press FREEZE again to unfreeze all cameras
*Performed in FULL screen mode:
-Press the FREEZE key, F1234 is displayed in the top left corner
-Press FREEZE again to unfreeze current camera
7.AUTO SWITCHING FUNCTION:
-Press the AUTO key, signal will automatically switch between
-Press the MODE key to disable auto switching and go back to QUAD mode
(Time delay can be adjusted in SYSTEM SETUP, see below)
6
w w w . s v a t . c o m