Installation, Mounting, Step by Step | SVAT Electronics VU5 manual

SVAT ELECTRONICS now you can see

IMPORTANT INFORMATION

While this camera is weatherproof, it is not waterproof. Please do not install it in areas that receive direct rain or under eaves trough draining spots. Do not cut the DC power cable of this camera to fit with another power source. Do not cut the video connection wire to fit with a different video connection type. Any unauthorized modifications will void your warranty.

INSTALLATION

THINGS TO CONSIDER BEFORE YOU INSTALL YOUR CAMERA

•The camera should be installed between 8 and 13ft above the area to be monitored.

•Ensure there are no obstructions in the camera’s view, to maximize viewing area.

•Ensure that the sunshade is positioned to avoid glare and position camera away from direct sunlight.

•Decide whether the camera will be wall-mounted or sit on a desk/table top. If wall mounting, use the mounting hardware in the package. We recommend that the mounting bracket is secured using the included screws for all installations.

•This camera comes with 60ft of video/power wire. Please make sure that you mount the cameras no more than 60ft from the

TV/monitor/VCR/DVR.

•We recommend using a surge protected power bar to protect the cameras internal circuitry.

MOUNTING

1.Screw the mounting bracket into the camera’s mounting hole, turning it clockwise.

2.Mount the camera in the desired location no more than 60 feet from the TV/Monitor/VCR/DVR unless you have purchased additional wiring. You may wall mount or desk mount these cameras.

3.Adjust cameras to the desired viewing angles.

STEP BY STEP

1.Plug the 4 PIN DIN female connection on the camera into the 4 PIN DIN male connection on the 60ft video/power wire.

2.Match the two arrows on top of both connecting cables.

1 1

VU5