Troubleshooting, Situation Indication Action

Operator Manual – SRA Series Amplifiers

Page - 9

Troubleshooting

Situation	Indication	Action
No Sound	Signal LED not lit	Check AC plug. Confirm that AC outlet works by plugging
	Clip LEDs not lit	in another device.
	Signal LED not lit	Make sure the signal source is operating and try another
		cable. Check position of Volume Pots.
	Signal LEDs responding to signal level	Check the speaker wiring for breaks.
		Try another speaker and cable.
	Protect LED is lit	Overheating will cause protective muting. Check for
		proper ventilation.

No Channel	No Channel Separation	Check the mode indicators on the front panel and make
Separation		sure the mode selector on the rear panel is in the two
		channel (stereo) position. Make sure other equipment in
		the signal path such as mixers and preamps are set for
		stereo, not mono
Distorted Sound	Power LED is lit	A faulty speaker or a loose connection could cause this.
		Check the wiring and try another speaker.
	Signal LEDs responding to signal level	The signal source might be clipping. Keep the volume
		pots at least halfway up so that the source does not have
		to be overdriven.
	Clip LEDs not lit	Keep the volume pots at least halfway up and try
		changing input sensitivity with the gain selector on the
		rear.
Hiss	Hiss	Unplug the amplifier input to confirm that the hiss is
		coming from the source or from a device upstream. Erratic
		or popping noises indicate an electronic fault in the
		offending unit. To keep the noise floor low, operate the
		primary signal source at full level, without clipping. Avoid
		boosting the signal further between the source and the
		amplifier.
Squeals and	Squeals and Feedback	Microphone feedback should be eliminated with mixer
Feedback		controls. If noise continues to build up with no microphone
		gain, there is a serious fault in the signal processors or
		cables. Working in succession from the signal source
		towards the amplifier and check each device in the signal
		path by reducing its gain or by unplugging it.

Important Safety

Instructions – 2

Introduction - 3

The SRA Series - 4

Physical Description - 5

Installation – 6

Operation – 8

Troubleshooting - 9

Spec Table - 10

Dimensions - 11

Warranty - 12

R-052510 specifications

The Ashly R-052510 is a cutting-edge audio processing device designed for professional audio applications. It stands out in today’s market thanks to its innovative features and technologies that cater to the needs of sound engineers, audiophiles, and anyone dedicated to high-quality audio.

One of the main features of the R-052510 is its comprehensive DSP (Digital Signal Processing) capabilities. This technology allows for real-time audio manipulation, ensuring optimal sound quality in various environments. The device provides extensive signal routing options, enabling users to customize the audio paths according to their specific requirements. This flexibility makes it an ideal choice for live sound, recording studios, and broadcast applications.

The R-052510 also incorporates a user-friendly interface, equipped with an intuitive LCD display that simplifies navigation through its extensive features. Users can easily access and adjust settings such as equalization, compression, time alignment, and limiting with minimal effort. This focus on user experience allows sound professionals to quickly achieve the desired audio results.

In terms of connectivity, the R-052510 offers a plethora of options. It features both analog and digital inputs and outputs, including AES/EBU, SPDIF, and USB interfaces. This versatility facilitates seamless integration into any existing audio setup, making it suitable for both modern digital audio workflows and traditional analog systems.

The device also boasts advanced control options. With its network capability, users can manage the R-052510 remotely via Ethernet, allowing for more dynamic control during live performances or studio sessions. This feature enhances convenience, especially in situations where manual adjustments might be challenging.

Durability is another hallmark of the Ashly R-052510. Designed for professional use, it features a rugged chassis that can withstand the rigors of touring and installation. This reliability ensures that users can depend on the device in demanding environments.

In summary, the Ashly R-052510 is a powerful audio processing unit that combines high-quality sound manipulation with intuitive control and robust design. Its advanced DSP capabilities, extensive connectivity options, and user-friendly interface make it an invaluable tool for audio professionals looking to elevate their sound quality.