Method 1 (Recommended):
Add the DVR’s IP address to the Trusted Sites in Internet Explorer.
1.Open up Internet Explorer.
2.Click on TOOLS.
3.Click on INTERNET OPTIONS.
4.Click on the SECURITY Tab.
5.Click on TRUSTED SITES.
6.Click on the SITES button.
7.Type in the IP address of the DVR in the following format: http://192.168.0.108 and click ADD.
8.If Require server verification (https:) for all sites ...” is selected you will need to uncheck the selection box.
The IP address used in the example above is for internal network viewing. If you are trying to access the DVR from a remote location you will add the “External IP Address” to the trusted sites list. See Finding your External IP Address.
9.Change the default settings for the TRUSTED SITES zone to low. Click on DEFAULT LEVEL and change the security level of the zone to “Low”. This can be done by running the slider to the bottom. This will allow ActiveX controls from the DVR to be downloaded and the DVR to be viewed on the computer.
10.Click Apply.
11.Click OK.
CV501 - 16CH | 49 |
|
|