Special:
1.Select SPECIAL by using the UP and DOWN buttons.
2. Select one of the modes by using the UP and DOWN buttons.
CAM TITLE: When input, the Camera ID is displayed on the monitor.
A.Move the arrow indicator to CAMERA ID using the UP and DOWN buttons on the SETUP menu screen.
B.Select ON using the LEFT and RIGHT buttons.
Note:
When CAM TITLE is set to OFF, the camera title is not displayed on the monitor.
C. Press the SET UP button.
D. The camera title can be up to 15 alphanumeric characters in length. 
Move the cursor to choose a
character.
Select the desired character by pressing the SET UP button. The cursor will move to the next position.
Repeat the above until the camera title has been created.
Note:
If the wrong camera title has been input, move the cursor to CLR and press the SET UP button to erase characters.
11 |