Rollei AF5.0 manual Selecting frequency for fluorescent lamp, Auto power-off, Memory Full, No Card

Selecting frequency (for fluorescent lamp)

Warning signs and icons

Left button (reverse)

While the camera is in Record mode, press Left button to select frequency for shooting under fluorescent lamp(s). 50Hz and 60HZ alternately appears on the monitor for selection.

Caution

*This is to prevent the flickering of light under fluorescent lamp(s). Except for high-frequency fluorescent lamp(s), stripes may appear across images captured under normal fluorescent lamp(s) at the incompatible frequency. Even set at the correct frequency, stripes may appear under strong fluorescent lighting.

Warning signs:

Memory Full

When a memory card is used up and shutter release button is pressed, MEMORY FULL sign will appear. To continue shooting, deletion of partial or all images on the card will be necessary. Otherwise, replace memory card with new one.

Warning signs:

No Card

When a mini SD memory card is not loaded, the situation

Auto power-off

The camera, when left without operation for longer than 60sec, automatically activates Auto power-off circuitry to turn power off.

Press Power switch again to resume operation.

is indicated in this way, and the power is turned off automatically.

44 45