Phase One H 5 manual Other Photographic Equipment, 10.4 10.5

Page 35

Windows Getting Started

Lens Flash Sync to

Mounting Plate Flash

Sync

IEEE1394 cable to computer

Cable from Mounting

 

Plate to Mamiya Body

Flash Sync to strobes

Cable Connections for the Mamiya RZ67 Pro II

4)Connect the included Sync Cable from the lens’ flash sync to either the connector on the camera back marked “C” or the the Mamiya Mounting plate.

5)If using a motorised camera,

connect the included Motor Cable to the connector on the right side of the camera back marked “M”.

6)If flash is used then connect the Flash Sync Cable (not included) from the strobes to the connector on the right side of the Phase One H 5 marked “F”.

Windows Getting Started

7)Finally, connect one end of the included IEEE 1394 cable to any one of the empty ports on the newly installed card, or the built-in 1394 port. Connect the other end to the camera back. These cables can only be inserted one way and may require a little pressure to insert.

8)Please note: For the Mamiya RZ the camera must be set to take multiple exposures in order to use the Phase One H 5. The multiple exposure selector (M) is combined with the film back revolve switch (R).

Other Photographic Equipment

While the Phase One H 5 has been made as compatible as possible with photographic equipment, there are a few issues to be aware of:

1)When using the Phase One H 5 with a Hasselblad 555ELD, the setting on the front of the Hasselblad needs to be in the “Film” position.

2)When using the Phase One H 5 on a view camera use the “Two Shot Mode”. This means that the shutter release is activated twice. To shoot an image, release the shutter, reset it, and shoot again. The first shot wakes the camera up, and the second is the actual exposure. Alternatively, pressing the “Capture” button in the preview window will wake the camera up and then the shutter can be fired once to take a photo.

The camera will remain “awake” for 20 seconds or until the next capture.

3)When used on a Mamiya RZ67 Pro II the selector on the right side of the camera body must be in the “M” position.

4)The Phase One H 5 fully conforms with the ISO 10330 Standard for Photographic Strobe Systems; unfortunately not all strobe manufacturers comply with this standard. Check with the manufacturer of your strobe system to prevent damage.

5)The “Strobe Equipment” section of this guide provides a list of devices that have been tested with the Phase One H 5.

10.4

10.5

Image 35
Contents Phase One H 5 User Guide Software Set-up ContentInstall the Software Macintosh Getting StartedInstall the Software 11.1 Tools Software Setup 12.1Additional Features Trouble ShootingTable of Contents Macintosh Getting Started Photographic Equipment Set-up Hardware Set-upCable Connections for the Mamiya RZ67 Pro Green Lights Flickering LED Indicators LightsOther Photographic Equipment Green Lights Steadily OnInstall the Software Previews Installed ItemsUsing the Phase One H CapturesOrganizing Images Software Set-upTaking Photographs Selecting landscape or portrait orientationPreview Generation Deleting Editing and Selecting ImagesEditing Exposure Monitor PreviewingPreview Window in detail Gray Balancing Develop SpecificationColor Info All Selected Captures Apply to ImageCurrent Capture Developing Images RestoreReset Pick PositionFile Format Export PreviewsName Postfix Image SizeApply Color Management Destination FolderCropping ToolsExposure Warning Tool Crop Mask ToolZoom Tool Grid ToolTonal Range/Gradation Curves/Film Curve Threshold Unsharp MaskAmount Focus Tool Camera SettingsColor Management Capture NavigatorName Tab PreferencesDevelop File Location Tab Include Capture CountAlways include unique suffix Digit unique suffix numberProfiles Creator File ForAfter Develop Camera Set-up Setting up ICC profiles in Adobe PhotoshopCamera Information Demoirize plug-in Additional FeaturesPattern size Advanced modeUsing advanced mode on skin and hair Using advanced mode on textilesTrouble Shooting Windows Getting Started 10.2 10.3 10.4 10.5 10.6 10.7 Windows Getting StartedInstall the Software 11.2 11.3 Floppy disk installation for portable solutionSoftware Set-up 12.2 12.3 Naming SessionsPreview Window Capture Collection13.2 13.3 Function Window/Function TabsDeleting Images Remaining Resources Function Tabs and WindowCapture Tab Exposure Window13.6 13.7 Gray Balance Tab13.8 13.9 Set as Capture gray balanceApply gray balance to current captures Exposure Tab13.10 13.11 LevelsCurves 13.12 13.13 Focus TabFocus Preview Reuse Capture Settings Automatic Focus UpdateMenu Settings Save the Capture SettingsSearch via annotations Copy from active captureDeselect reference file Add Annotations to the Capture FilesDeveloping Embed information in Tiff filesExample Automatic Preview EnhancementBegin Developing Batch Develop ImageAdd Image to Batch Remove Image from Batch13.22 13.23 Browse Develop Folder13.24 13.25 Create CD-ROM and Web indexTools 14.2 14.3 Gray Scale ViewingSoft Proofing and Color Management Monitor Simulate Sharpening SettingsCamera Profile Destination working space14.6 14.7 Compare Captures Side By SideZoom to Fit Preview Expand PreviewCamera Info Additional Features 16.2 16.3 Trouble Shooting Fall time Strobe EquipmentCurrent 18.2 18.3 Strobe Systems Status18.4 18.5 Photographic Compatibility Lenses Status Lenses # BR with RZ adaptor from Phase OnePhase One H 5 for Mamiya 645AF S/N # BT Camera Systems Status19.4 19.5 Phase One H 5 for Contax 645 S/N # BS Camera Systems Status

H 5 specifications

Phase One H 5 is a remarkable addition to the realm of high-end medium format cameras, designed for professional photographers who demand precision, flexibility, and exceptional image quality. This camera represents the pinnacle of Phase One's commitment to delivering cutting-edge imaging solutions, catering to a range of photographic applications from fine art to commercial photography.

At the core of the Phase One H 5 is its impressive sensor technology. Utilizing a large medium format sensor, the H 5 captures images with stunning resolution and dynamic range. This capability allows photographers to produce large prints without any loss of detail, making it ideal for gallery exhibitions and high-end client work. The exceptional image quality is complemented by advancements in noise reduction, which ensures that images maintain clarity and detail even in low-light conditions.

The H 5 features a modular and versatile design, allowing users to customize their shooting experience based on specific project requirements. Photographers can seamlessly switch between different lens options, providing flexibility in framing and composition. This modularity is further enhanced with various grip and ergonomic options, ensuring comfort during extended shooting sessions.

Another standout technology in the Phase One H 5 is its advanced autofocus system. Equipped with fast and accurate autofocus capabilities, the camera ensures that subjects are sharply in focus, even during fast-paced shooting. This is particularly beneficial for photographers in dynamic environments, such as events or wildlife photography.

The H 5 also boasts impressive connectivity features. With built-in Wi-Fi and tethering options, photographers can easily share images in real-time and connect with devices for editing and processing. This level of connectivity streamlines workflow, allowing photographers to focus on their creative vision without the hassle of complicated setups.

Durability is a key characteristic of the Phase One H 5. Constructed with robust materials, the camera is designed to withstand the rigors of professional use. Weather-sealing provides protection against dust and moisture, making it suitable for various shooting conditions, from studio work to outdoor adventures.

Overall, the Phase One H 5 combines state-of-the-art technology, exceptional image quality, and a versatile design to meet the demands of professional photographers. Its impressive features and characteristics set a new standard in medium format photography, making it an invaluable tool for capturing stunning imagery.