Lens Converter Settings (LENS)
If you have attached one of the lens converters available sepa- rately for the COOLPIX 950, you can use the LENS option to
These options should only be used when the appropriate lens converter is attached. When using the camera without a lens converter, select NORMAL for normal camera operation.
adjust zoom, flash, and other settings to the optimum values for the chosen converter. The following preset combinations of settings are available:
| Option | How it works | |
| WIDE | Camera zooms all the way out, allowing | |
| (for | ||
| you to take photos at the maximum | ||
| |||
| possible angle. Flash is disabled. | ||
| verter) | ||
|
| ||
|
|
| |
CONCEPT |
| Camera zooms in to maximum optical | |
TELEFOTO | zoom position for enhanced telephoto | ||
photography. Zoom can be adjusted | |||
(for | |||
between maximum zoom the middle | |||
telephoto lens | |||
optical zoom position (the third step | |||
converter) | |||
shown in the LCD monitor zoom indi- | |||
| |||
|
| ||
|
| cator). Flash is disabled. |
To change the lens converter setting:
1 Turn the mode dial to
2 Press the MENU button to display the shooting menu, then press it again to view the second page.
3 Using the zoom buttons, highlight LENS and press the
4 Use the zoom buttons to select the de- sired option from the menu shown at right, then press the
1
PRACTICE
S H O O T I N G
F O L D E R S
AUTO
L E N S
A E L O C K
U S E R S E T
C A R D F O R M A T
R E S E T A L L
S E T U P
➔
L E N S
N O R M A L
W I D E
T E L E F O T O
F I S H E Y E 1
F I S H E Y E 2
| Camera zooms all the way out to take | |
FISHEYE1 | fisheye photographs with the four cor- | |
ners of the frame blacked out, creating | ||
(for | ||
a circular frame. Flash is disabled and | ||
lens converter) | focus fixed at an autofocus setting of | |
| ||
| infinity. Centerweighted metering is | |
| used. | |
|
| |
FISHEYE2 | Camera zooms all the way out to take | |
(for | fisheye photographs in a square frame. | |
lens converter) | Flash is disabled. |
At settings other than NORMAL, a lens converter icon () will appear in the LCD monitor, and settings will be optimized for the chosen converter as described at left. Choose NORMAL to cancel changes to settings and restore normal camera operation.
The Camera Menus: The | - 32 - |