Operating Elements - MicroSD Card Insertion & Formatting
MicroSD card insertion
1.Insert the MicroSD card until it clicks into place, the metal
contacts should be facing upward.
2.To remove the MicroSD card, push it further into the camera and it will spring out from the camera for being pulled out.
Insert or remove the MicroSD card only when the camera is turned off.
MicroSD card formatting
1.Press and hold 
to turn on the camera.
2.Press and hold 
, 
and 
to format the MicroSD card.
3.Press 
after the beep to confirm. The status indicator flashes in blue and red alternately.
4.When formatting is finished, the camera will give two beeps and the status indicator will light green.
When the available memory of MicroSD card is less than 10%, the status indicator flashes blue.
ATCMini – 8
en.indd 8 | 8/9/2011 1:17:12 |