Operating Elements - Battery Installation & Charging
•Insert the provided battery to the battery
compartment. The metal contacts should face toward the camera.
•Lever the latch to pull the battery out.
Make sure the battery is locked in place.
1.Connect the camera to a USB port through USB cable. The status indicator will flash green and
red alternately and two beeps will be generated.
2.When charging is finished, the status indicator
turns green and a long beep will be generated.
Remove the camera from the USB port.
Recharge the battery when the status indicator flashes green. The battery is low.
Please fully charge the battery before first use.
ATCMini – 6
en.indd 6 | 8/9/2011 1:17:12 |