Atlas Sound PA1001G specifications Unswitched Outlet

Page 7

Owner’s Manual

PA1001G Power Amplifier

 

 

1

5

11

3

2

4

10

6

7

8

9

Rear Panel

1.IEC AC Receptacle

Connect this grounded power cord to 100VAC - 240VAC 50/60Hz circuits only. Serious damage may result otherwise.

2.AC Mains Fuse

For 100v - 240v 50Hz - 60Hz operation use Slow Blow T1.6AL 250v, 5mm x 20mm.

Note: Fuse is internal and should only be changed by a qualified technician.

3.UNSWITCHED OUTLET

The un-switched outlet provides power for other devices such as video projectors, CD players or laptop computers. This AC outlet is live all the time as long as the power cord is plugged into a live duplex outlet. Keep the total power draw below 500W. This outlet can also be used to remotely turn on the PA1001G. See AC Sense Trigger for more detailed information (page 9).

4.RCA Input

Unbalanced signals are accepted when using the Left and Right RCA connectors. These inputs are electrically summed into a mono signal. Note: On the bottom of the chassis there are level controls for the for the Left and Right RCA inputs. This allows you to adjust the level from OFF to +6dB. Factory settings calibrated for 320mv of input sensitivity. See Mixer Function page 9 for use.

5.AC Fault LED

This LED will illuminate Red if a fault has occured with the AC spike supression circuity. Usually cause for this is a lightning strike, causing a voltage surge. The AC Unswitched outlet may still function but there may be no AC surge or Spike supression protection for the product connected to the outlet. It is recommended to have the amplifier looked at by certified technician.

6.Balanced Input Connections

Left and Right balanced input signals can be accomplished by wiring the removable Phoenix type connector per the labeling on the rear of the amp. Note: The middle pin is the common ground connection for both Left and Right input ground. For unbalanced signals connect the (–) and (GND) pins together.

7.Speaker Connections

A removable Phoenix type connector is supplied to connect your speakers to the PA1001G. It is recommended to use 16guage wire or higher for connection to the speaker. Note: Do not overload the amp by connecting to many speakers to the amp. Four ohms per channel is the maximum load.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

– 7 –

AtlasSound.com

Specifications are subject to change without notice.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PA1001G Power Amplifier Table of Contents PA1001G Power AmplifierImportant Safety Instructions PA1001G Power Amplifier Introduction Key FeaturesApplications Limit LED Front Panel Power SwitchPower LED Signal LEDUnswitched Outlet Remote Level Control VCA Four Position Dip Switch AssignmentAudio Sense Trigger Adjustment Line Level OutMixer Function Bottom Chassis View Audio Sense Control Adjustment Rear Panel Installation and Considerations CablingPlacement and mounting of the PA1001G Pole Mount Pre Assembly Pole Mount Final Assembly Protection Circuits Output PowerSignal to Noise Ratio Power RequirementPA1001G Power Amplifier Service Limited Warranty

PA1001G specifications

The Atlas Sound PA1001G is a powerful amplifier designed specifically for commercial applications, delivering high-quality sound with exceptional reliability. As part of the Atlas Sound family of products, the PA1001G is engineered to meet the demanding needs of professional audio systems, making it an excellent choice for schools, gyms, conference rooms, and retail spaces.

One of the standout features of the PA1001G is its robust power output of 100 watts, offering enough amplification to serve medium-sized areas without compromising sound quality. The amplifier has a comprehensive frequency response range, ensuring that both low and high frequencies are reproduced accurately, enabling a rich and immersive listening experience.

The PA1001G is equipped with a built-in mixer that provides the capability to connect multiple audio sources, including microphones and playback devices. This mixer allows users to adjust levels and mix audio seamlessly, which is particularly beneficial for environments that require announcements, music playback, or presentations.

Another notable technology integrated into the PA1001G is its priority paging feature. This allows for quick communication in emergency situations, as the system automatically prioritizes the microphone input over other audio sources. This feature is crucial for maintaining safety and ensuring that important announcements are heard loud and clear.

In terms of connectivity, the PA1001G offers multiple input options, including balanced XLR and unbalanced RCA inputs, making it versatile enough for various audio setups. The amplifier also supports a variety of speaker configurations, providing the flexibility to create tailored audio solutions based on the specific needs of the installation.

The chassis of the PA1001G is designed with durability in mind, featuring a rugged construction that can withstand the rigors of daily use. Additionally, it includes advanced heat management technology, which helps maintain optimal operating temperatures and enhances the longevity of the unit.

Overall, the Atlas Sound PA1001G is a reliable and versatile amplifier that stands out for its impressive power, flexibility in connectivity, and innovative features tailored for commercial use. Whether for background music, public address systems, or dynamic presentations, the PA1001G serves as a strong contender in the professional audio market, ensuring that users receive a high-performance experience with every use.
Top Page Image Contents