Atlas Sound PA1001G Front Panel Power Switch, Power LED, Limit LED, Signal LED, Input Gain

Page 6

PA1001G Power Amplifier

Owner’s Manual

 

 

3

2

1

5

7

6

4

Front Panel

1.Power Switch

This switch turns the AC Mains power to the amplifier on or off.

2.Power LED

Illuminates Red when the power switch is depressed. Red means the amplifier has AC mains power to the unit and is standby or sleep mode. When LED is Blue the unit is active and will pass audio.

3.Limit LED

The Limit LED will illuminate Red if either channel of the PA1001G reaches maximum output power or if a fault is detected with in the amplifier. The PA1001G features a true limiter circuit which help prevents the amplifier from hard clipping or from being over driven. An occasional flash of the LED is ok, if the LED is on continuously reduce the input level of the amp. After the reducing the input level and the Limit LED remains on, recheck the load connections to the amp.

4.Signal LED

The Signal LED illuminates Green if there is audio signal present at the input of the amp.

5.Input Gain

The Left and Right rotary control varies the amplitude of the signal fed into the amplifier. Turn clockwise to increase and counterclockwise to decrease the signal level. Note: This post the RCA mix level control. See mix function below.

6.Bass Control

Normally set at the 12 o'clock position unity gain, rotating clockwise will increase (boost) bass frequencies to a maximum of +6dB at 100Hz. Rotating counterclockwise from the 12 o'clock position will decrease (cut) bass frequencies to a maximum of -6dB at 100Hz. Note: This feature affects both the Left and Right channels the same.

7.Treble Control

Normally set at the 12 o'clock position unity gain, rotating clockwise will increase (boost) treble frequencies to a maximum of +6dB at 10kHz. Rotating counterclockwise from the 12 o'clock position will decrease (cut) treble frequencies to a maximum of -6dB at 10kHz. Note: This feature affects both the Left and Right channels the same.

 

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

 

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasSound.com

– 6 –

 

 

 

Specifications are subject to change without notice.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents PA1001G Power Amplifier PA1001G Power Amplifier Table of ContentsImportant Safety Instructions PA1001G Power Amplifier Key Features IntroductionApplications Signal LED Front Panel Power SwitchPower LED Limit LEDUnswitched Outlet Line Level Out Four Position Dip Switch AssignmentAudio Sense Trigger Adjustment Remote Level Control VCAMixer Function Bottom Chassis View Installation and Considerations Cabling Audio Sense Control Adjustment Rear PanelPlacement and mounting of the PA1001G Pole Mount Pre Assembly Pole Mount Final Assembly Power Requirement Output PowerSignal to Noise Ratio Protection CircuitsPA1001G Power Amplifier Limited Warranty Service

PA1001G specifications

The Atlas Sound PA1001G is a powerful amplifier designed specifically for commercial applications, delivering high-quality sound with exceptional reliability. As part of the Atlas Sound family of products, the PA1001G is engineered to meet the demanding needs of professional audio systems, making it an excellent choice for schools, gyms, conference rooms, and retail spaces.

One of the standout features of the PA1001G is its robust power output of 100 watts, offering enough amplification to serve medium-sized areas without compromising sound quality. The amplifier has a comprehensive frequency response range, ensuring that both low and high frequencies are reproduced accurately, enabling a rich and immersive listening experience.

The PA1001G is equipped with a built-in mixer that provides the capability to connect multiple audio sources, including microphones and playback devices. This mixer allows users to adjust levels and mix audio seamlessly, which is particularly beneficial for environments that require announcements, music playback, or presentations.

Another notable technology integrated into the PA1001G is its priority paging feature. This allows for quick communication in emergency situations, as the system automatically prioritizes the microphone input over other audio sources. This feature is crucial for maintaining safety and ensuring that important announcements are heard loud and clear.

In terms of connectivity, the PA1001G offers multiple input options, including balanced XLR and unbalanced RCA inputs, making it versatile enough for various audio setups. The amplifier also supports a variety of speaker configurations, providing the flexibility to create tailored audio solutions based on the specific needs of the installation.

The chassis of the PA1001G is designed with durability in mind, featuring a rugged construction that can withstand the rigors of daily use. Additionally, it includes advanced heat management technology, which helps maintain optimal operating temperatures and enhances the longevity of the unit.

Overall, the Atlas Sound PA1001G is a reliable and versatile amplifier that stands out for its impressive power, flexibility in connectivity, and innovative features tailored for commercial use. Whether for background music, public address systems, or dynamic presentations, the PA1001G serves as a strong contender in the professional audio market, ensuring that users receive a high-performance experience with every use.
Top Page Image Contents