Phase One 85280002 manual Care and Cleaning, Storage and Handling, Cleaning the camera back case

Page 10

PhotoPhase Digital Camera Back for Large Format Cameras – User's Guide

Section 4 Care and Cleaning

Your PhotoPhase camera back is a sensitive and high precision instru- ment. To keep it working properly, treat it carefully as you would any of your other high quality photography equipment, and take special note of the advice given here.

Section 4.1 Storage and Handling

Keep the camera back away from sources of moisture. Do not let liq- uid get in or on the unit.

Do not touch the CCD sensor or any of the other internal elements.

Always store your camera back with the dust cover slid all the way down over the scan area, so that the CCD sensor and other internal components are protected from dirt and damage.

Avoid extreme temperatures.

Protect the camera back from falls and collisions.

Section 4.2 Cleaning the camera back case

1.Disconnect the unit from power.

2.Be sure the dust cover is closed.

3.Lightly wipe the case with a clean, soft cloth, dampened with water. Do not allow moisture to get in any of the openings on the back panel or in the connectors.

Section 4.3 Cleaning the CCD Sensor

You must never touch the CCD sensor with your fingers, nor allow the surface to become dirty, scratched, or damaged in any way.

8

Image 10
Contents Edition Page Table of Contents For Your Safety PhotoPhase Digital Camera Back How it WorksBack Panel of the PhotoPhase Plus Back Panel Description PhotoPhase camera back mounted on a Sinar camera Mounting the Camera Back Mounting and Unmounting the Camera BackUnmounting the Camera Back Cleaning the CCD Sensor Care and CleaningCleaning the camera back case Storage and HandlingPage Camera Back Specifications