VTech 91-002843-000 user manual Getting Started

Getting Started

6

Note: The above amounts are approximations, the actual capacity depends on the shooting environments. The video length limit is 5 minutes per file.

GETTING STARTED

BATTERY INSTALLATION

Note: Adult assembly is required for battery installation.

• Make sure the camera is turned OFF.

• Locate the battery covers on the bottom

of the camera. Open the battery covers by separately pressing each trigger downward.

•Install 4 new “AA” batteries (2 on each side) as shown in the illustration below.

•Replace each battery cover with the arrow on the trigger pointing downward. Push down until the battery covers click into position.

BATTERY NOTICE

•Use new alkaline batteries for maximum performance.

•Use only batteries of the same or equivalent type as recommended.

•Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.

•Do not use damaged batteries.

•Insert batteries with the correct polarity.

•Do not short-circuit the battery terminals.

•Remove exhausted batteries from the toy.

•Remove batteries during long periods of non-use.

•Do not dispose of batteries in fire.

•Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the toy before charging (if removable).

• Rechargeable batteries are only to be charged under adult supervision.