MEMORY Card INSTALLATION
•Kidizoom® Camera Connect supports the below memory cards for memory expansion.
microSD 
microSDHC 
microSD Logo and microSDHC Logo are trademarks of
•Make sure the camera is turned OFF.
•Locate the memory card slot at the bottom of the camera.
•Pull up the rubber cover.
•Insert the memory card (not included) as illustrated. Once the memory card
is detected and can be used, the default memory will set as the memory card automatically.
•To remove the memory card from the slot, push the card once and it will eject.
Note: If a memory card is being used, data stored in the internal memory cannot be seen in the camera unless the memory card is removed. To prevent accidental data loss, make sure you have backed up all important data from your memory card before using.
TO BEGIN USING Kidizoom® Camera Connect
•Press the ON/OFF Button 
to turn on the camera.
•If it is the first time that you are turning on the Kidizoom® Camera Connect, you will see an option to select the date and time. Press the Up 
or Down Cursor Button 
to select the correct day, month, year, hour, and minute. Press the Left 
or Right Cursor Button 
to jump to the previous or the next setting item. Finally, press the OK button 
to confirm the setting. If you wish to change the date & time later, please go to Settings.
•After the date and time is set, when Kidizoom® Camera Connect is turned on, it will go directly into camera mode and you can start taking photos.
To Begin Using Kidizoom® Camera Connect
7