Victor GZ-MC100 instruction manual To protect valuable files

			GETTING STARTED EN 17
2 To insert a SD card, firmly insert it with its clipped		Selecting Recording Medium
edge first.
To remove a SD card, push it once. After the SD card
	Select the recording medium before starting recording or
comes out of the camera, pull it out.
	playback.
● Do not touch the terminal on the reverse side of the label.
	Example: When recording still images to a CF card
3 Close the rear panel firmly until it locks.
	1 Open the LCD monitor fully. ( pg. 18)
To protect valuable files
	2 Set the power switch to		or	while pressing down
Slide the write/erase protection tab on the side of the SD
	the lock button located on the switch.
card in the direction of “LOCK”. This prevents the SD card
	3 Press MENU. The menu screen appears.
from being recorded over. To record on this SD card, slide
the tab back to the position opposite to “LOCK” before	4 Press rt to select [MEMORY			DIS
inserting it.	CARD SETTING], and press 49.			CAMERA SETTING
NOTE:				BASIC SETTING
				MEMORY CARD SETTING
Before using a new SD card, it is necessary to format the				DISPLAY
card. ( pg. 26, 27)				QUALITY

WIDE MODE

GETTING STARTED

ATTENTION:

Do not insert or remove the SD card while the camera is turned on, as this may cause the SD card to be corrupted or cause the camera to become unable to recognize whether or not the SD card is installed.

5 Press rt to select [IMAGE MODE], and press 49.

6Press rt to select [CF SLOT], and press 49.

7 Press MENU to return to the normal screen.

COPY/MOVE NO. RESET VIDEO MODE

IMAGE MODE

VOICE MODE

FORMAT

CLEAN UP